Could Yakima Rack and Roll Accommodate E-Bike and Trike

Question

Question:

Have an e-bike and an e-trike both RAD. will this trailer accomodating both of them?

asked by: Marty

1

Helpful Expert Reply:

The Yakima part number # Y08111 is just the crossbars of Yakima Rack and Roll trailer which the correct size trailer for these 78 inch bars is the part # Y08107. This trailer would be able to accommodate both an e-bike and a trike.

expert reply by: Jameson C

1

Answer 1

While there isn't a life expectancy, per se, of the shocks on the Yakima Rack and Roll Trailer - 66" #Y08106 and 78" #Y08107, upgrading to the HD shocks is absolutely a good idea if your gear weighs around 200 llbs and…

view full answer...

Answer 2

I may have an option that will work for you, but it will depend on the exact weight of your E-bikes. The Inno Tire Hold II Roof Bike Rack - Wheel Mount - Clamp On - Aluminum #INA389 will fit the Yakima Rack and Roll Trailer #Y08107 and will…

view full answer...

Answer 3

I do have some great options for you, but since you are wanting to carry 2 E-Bikes and a Schwinn, the solution for a single bike carry is limited to the Yakima HoldUp 4 Bike Rack #Y02443-2. This really is a great bike rack that has a 200 lbs weight…

view full answer...

Answer 4

For the Yakima Rack and Roll Trailer part #Y08107 the height from the ground to the top of the inside of the coupler where the ball sits is 22 inches so then from the bottom of the coupler lip to the ground measures 20 inches when the trailer sits…

view full answer...

Answer 5

The Rack and Roll trailers, like the 66 inch long model #Y08106, are rated to tow at normal highway speeds. As always, exceeding posted speed limits is not recommended, especially when towing. You may want to consider a spare tire #Y08121 for the…

view full answer...

Answer 6

I reached out to my contact at Yakima and they confirmed that the Heavy Duty Shocks for Yakima Rack and Roll Trailer #Y08110 will fit on the Yakima Rack and Roll Trailer - 66 inch #Y08106. However the 66 inch trailer is not able to carry more than…

view full answer...

Answer 7

The heavy duty Rack and Roll shocks, part #Y08110, can only be used on 66 inch Rack and Roll if you upgrade it with the 78 inch crossmember kit. The crossmember kit is part #Y08111. The 66 inch trailer is rated up to 250 pounds so as long as…

view full answer...

Answer 8

The weight capacity for the standard Yakima Rack and Roll trailer like part #Y08107 is 250 lbs when used with the standard shocks. If you go to the HD shocks like part #Y08110 you increase that capacity to 350 lbs. This is recommended if you plan to…

view full answer...

Answer 9

Since we have started carrying the Yakima Rack and Roll trailer #Y08107 I have not heard any complaints regarding the wheel bearings failing and only a few instances where people wanted to replace the wheel assembly. If you need to replace your…

view full answer...

Answer 10

The Yakima EasyRider Double Decker Trailer #Y08129 is pretty well setup for off-road situations like you mentioned. It comes with shocks and decently aggressive tread tires so that it would handle moderate off-road scenarios like what most find…

view full answer...

Answer 11

While I don't have an exact picture of what you are looking for I did attach a picture of bike rack similar to the FrontLoader part #Y02103 installed on a Yakima Rack and Roll trailer part #Y08107 for you to check out. Prices are attached at…

view full answer...

Answer 12

According to Yakima, the Heavy Duty Shocks for Yakima Rack and Roll Trailer #Y08110 should only be used if you add the 78" crossmember kit #Y08111. They didn't have an exact reason for this, but it sounds like the concern is people will…

view full answer...

Could Yakima Rack and Roll Accommodate E-Bike and Trike

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching