Adapter to Go From Roadmaster Falcon Tow Bar to Blue Ox Base Plate Kit

Question

Question:

Hi - I have a Roadmaster Falcon All Terrain and want to mate it to my Blue Ox Base Plate on a 2020 Equinox. I dont have a serial number on the towbar. What adapter part numbers do I need to make that work?

asked by: Michael M

0

Expert Reply:

To go from your Roadmaster Falcon All Terrain tow bar part # RM-520 to your Blue Ox base plate kit part # BX1730 that you have on your 2020 Chevy Equinox you'd just need the adapter part # RM-031 and you'd be set.

expert reply by: Jameson C

0

Answer 1

I have a solution for you. The Blue Ox Base Plate Kit - Removable Arms #BX1730 will fit your current BlueOx tow bar. Next you will need aDemco Stay-IN-Play DUO Supplemental Braking System w/ Wireless Coachlink Monitor Proportional #DM86VR to make…

view full answer...

Answer 2

For flat towing your 2018 Chevy Equinox we do have the parts you need to flat tow it. For a base plate kit you'd need to start with the Blue OX part #BX1730 which is a confirmed fit. This would work great with the Blue Ox Tow Bar part #BX7380…

view full answer...

Answer 3

Yes the Blue Ox base plate kit part #BX1730 is compatible with the Aventa LX tow bar you have and would work great. I attached an install video for this base plate kit as well.

view full answer...

Answer 4

Yes, all of the base plates for your 2022 Chevrolet Equinox, like the: -Blue Ox Base Plate Kit #BX1730 will require removing the cold air grille for installation. Additionally, if you're needing a complete flat-towing setup, you're going to…

view full answer...

Answer 5

The Roadmaster Direct Connect base plate kit part #RM-523193-5 that you referenced does fit models of the 2022 Chevy Equinox that have the active shutters but you will need to trim them. This is mentioned in the attached install instructions for this…

view full answer...

Answer 6

While we do have base plate kit fits for your 2018 Chevy Equinox that has the 2.0 liter turbo engine upon further research you are correct the vehicle could only be towed on a dolly if it was front wheel drive like the Roadmaster #RM-2000-1. If…

view full answer...

Answer 7

If you have the 2019 Chevrolet Equinox Premier you can use Roadmaster diode wiring kit #RM-15267 along with 6-pole plug #RM-910030-8 that you will install in place of the included 7-way. An article on wiring is linked to assist you with this process.…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 11

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 12

Hello John. The #C96JR tail light kit for the 2023 Jeep Gladiator will indeed work with a Brake Buddy brake System Such as part #HM39524. So, if you plan to use a portable brake system, that is definitely what I recommend, and you do not need to get…

view full answer...

Adapter to Go From Roadmaster Falcon Tow Bar to Blue Ox Base Plate Kit

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching