Solution for Needing Replacement Circuit Board for Older Fan-Tastic Roof Vent

Question

Question:

I have a 2006 Monaco with Fan-Tastic fans and one of the controllers has failed. It was a wall mount made by KIB, part number MC411D. This part is no longer available and Im wondering if any of the newer model controllers will work with my fan?

asked by: Don B

0

Expert Reply:

I wish we could get what you need but apparently it's old enough our current options won't work. This means that you're going to have to upgrade to the Fan-Tastic Vent Roof Vent w/ 12V Fan and Remote # FV807350 to have a functional roof vent.

expert reply by: Jameson C

0

Answer 1

The number ( 411 D) you provided doesn't correspond with a Fan-Tastic Vent roof vent model number, but if yours uses the remote control #FV9068-09 that you referenced, that tells us it's a 7350 Series Fan-Tastic Vent Roof Vent, like…

view full answer...

Answer 2

The only way to get the replacement circuit board for your Fan-Tastic Vent Roof Vent is through part #FV807359, which is essentially all the main internal components, including the circuit board, screen assembly, powered lift, as well as a new…

view full answer...

Answer 3

I have attached for you below a list of troubleshooting steps for the Fan-Tastic Vent Roof Vents like part #FV807350 which will vary depending on what symptoms your roof vent is having and what particular model you have. The remote reprogramming…

view full answer...

Answer 4

I was able to locate Fan-Tastic Vent 8613-01, however that number came back to it being the document number of the manual which covered 8 different vent/fan options. If you can provide me with the model number of your vent (which can usually be found…

view full answer...

Answer 5

Sounds like you are looking for a replacement fan blade and motor setup for a Fan-Tastic roof vent part number 5300. For that you'd want the part #FVK8017-00 and you'd be set.

view full answer...

Answer 6

It sounds like the powered lift is no longer working on your Fan-Tastic Vent roof vent. More than likely the motor has gone bad and replacing it will solve your problem. You can use the #FVK6010-81 for white or the #FVK6010-80 for off-white.

view full answer...

Answer 7

Your Fantastic Vent model 8100ts doesn't have replacement parts available, so I recommend using a circuit tester like #PTW2993 to check for power functions. I reached out to the manufacturer and in addition to this, they said to check the circuit…

view full answer...

Answer 8

That does not sound fun to deal with, I have a solution for you though. It sounds like either the remote needs to be reset or you do not have proper voltage going to the unit. To reprogram the remote hold it at least 12 inches or closer to the…

view full answer...

Answer 9

You will be able to close your screen door with the Lippert SolidStep #LC791575 on your trailer; I've added a pair of customer photos that we received which show you the step on and their screen doors closed. You will need to make sure the steps…

view full answer...

Answer 10

The SolidStep Manual Fold-Down Steps part #LC791574 would be correct for your Grand Design Reflection 337RLS as it works with doorways between 28" - 30" and entry height from 35" - 44". This is an excellent upgrade for your RV and…

view full answer...

Answer 11

Most likely, yes, the SolidStep Manual Fold-Down Steps #LC791574 would fit without removing the frame mounted steps under the entry door. Customers have done this before, see picture. I have included a link to a video review of these steps for you.

view full answer...

Answer 12

That specific portion of the install instructions of the SolidStep Manual Fold Down Steps part #LC791574 refers to the floor covering. Underneath that RVs do all have wood sub floors.

view full answer...

Solution for Needing Replacement Circuit Board for Older Fan-Tastic Roof Vent

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching