In Bed 7-Way Wiring Harness For a 2023 Ford F-250

Question

Question:

Do you carry the in bed wiring for my 2023 F-250?

asked by: Trey

0

Expert Reply:

Yes, the Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness # 41157 will fit your 2023 Ford F-250. This wiring will tee into the factory 7-way at your bumper and provide you with a 7-way connector you can install inside your bed.

expert reply by: Bud M

0

Answer 1

The 5th wheel trailer wiring you have installed on your 2017 Ford F-350 is going to be like the #41157 which only has two connections that you'll need to check. But since the rear 7-way is working that would indicate that the issue is the…

view full answer...

Answer 2

The only pin that should be continuously showing 12V power on the 7-Way connector on your vehicle is the 12V power circuit which is normally the black wire but not always. In 7-way wiring the 12V auxiliary power feed is carried on the contact at the…

view full answer...

Answer 3

The Replacement Header Stop #TX1704187 that you referenced is designed specifically for TruXedo Lo Pro and Edge tonneau covers so there's a good chance it won't fit your cover unless you have either of these models or it's the same size.…

view full answer...

Answer 4

While there is no need for a slider hitch for a long bed truck, there is no reason you couldn't use one in a long bed truck. Normally when we get this question the slider hitch is a manual slider and we recommend just leaving the slider in the…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

There is not a plug and play adapter for your Lance connector that we are aware of. Typically this is installed by the Lance dealer. A junction box/7-way plug kit like #HS381-9000 is an option you have to convert the camper to match the 7-way RV…

view full answer...

Answer 8

Thanks for the photo, that was a big help. And the answer is yes, your 2023 Ford F-350 Cab & Chassis is 100 percent compatible with the Curt 7-way: - Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector #C69CR…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Yes, you can and it'll allow you to keep the one on your bumper. I recommend the Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector item #C57010. This harness puts a 7-way connector in the bed of your 2024 Ford F-250 and makes…

view full answer...

Answer 11

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 12

The Custom Underbed Installation Kit for B&W Companion 5th Wheel Trailer Hitches item #BW83FR and item #BW73FR are identical kits that both fit the 2023 Ford F-350 with either the 6-3/4' or 8' bed lengths. It looks like item #BW83FR was…

view full answer...

In Bed 7-Way Wiring Harness For a 2023 Ford F-250

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching