bing tracking image
Q & A Icon

Recommended Flat Towing Set Up for a 2010 Toyota Corolla  

Question:

Hi I would like to flat tow a 2010 Toyota corolla behind my 2016 Winnebago Minnie Winnie class c motorhome w/a ford E450 chassis. If this is possible can you provide me the links to the equipment I need. Thank You

0

Expert Reply:

Yes, you can flat tow a 2010 Toyota Corolla but only if it has a manual transmission. If you do not have a manual transmission you will want to use a dolly like item # DM9713093.

To flat tow your 2010 Toyota Corolla you will need the following parts:

Tow Bar and Safety Chains - Roadmaster Falcon 2 Tow Bar item # RM-520 and item # RM-643

Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms item # 1188-3

Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267

Supplemental Braking System - Brake Buddy Select 3 Portable Supplemental Braking System item # HM39524

High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. I have linked a FAQ article that explains all this in more detail along with our selection of adapters.



expert reply by:
0
Jerred H

Products Referenced in This Question






Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>