Roadmaster Tracker Tow Bar Review Video

The Roadmaster StowMaster Tow Bar #RM-501 is compatible with the Roadmaster Crossbar-Style Base Plate Kit #118-15 so you shouldn't need any other components aside from some safety chains, like part #RM-643. If your StowMaster doesn't have the…

What you have in your picture is a very old StowMaster Tow Bar #RM-501 which is still attached to some base plates. I reached out to my contact at Roadmaster who said the serial number from the StowMaster indicates that it is rated for 5,000 lbs but…

Yes the 2001 Honda CR-V with an automatic transmission can be flat towed. First thing you'd need is a base plate kit like the part #1528-3 to provide the connection point for a tow bar. In addition to the base plates, you will also need a…

To make your etrailer SD Non-Binding Tow Bar for Duncan Base Plates - RV Mount - 2" Hitch - 6,000lbs #e24ZR compatible with your Roadmaster Crossbar-Style Base Plate Kit #1009-1 you'll need to first unbolt both clevis from the arms of the…

This conversion is possible using the Roadmaster Brite-Lite Wiring Converter #RM-732. On the converter on your motorhome side, the white wire is the ground, red is the brake, yellow is left turn, and green is right turn. On the output side for a…

The main difference between the Blue Ox Adventurer Tow Bar #BX7322 and the Tow Ready Adjustable Tow Bar #63180 is that the Tow Ready has a maximum speed rating of 45 mph. The Blue Ox does not have this restriction. Both are car-mount tow bars that…

Yes, the Roadmaster EZ4 base plate kit #RM-521424-4 is compatible with the Blue Ox tow bar #BX7380 (safety cables included) as long as you use Roadmaster base plate to Blue Ox tow bar adapter #RM-032 and Roadmaster tow bar quick disconnect kit…

The Roadmaster Direct Connect Base Plates #RM-521453-4 are going to install in the area that the skid plate is located, not on top of the bumper or in front of it, which is where I'm assuming most of winches are going to be mounted. If you've…

The Roadmaster StowMaster Tow Bar - Car Mount - 2" Ball - 6,000 lbs #RM-501 weighs 57 lbs. That is including the hardware and plates that connect to your base plates, so it will be closer to 50 lbs when you disconnect it.

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a 1…

Yes, the Roadmaster Tracker Tow Bar part #RM-020 that you referenced is designed to work with EZ Roadmaster base plate kits like the part #521423-1 that you referenced. I attached videos for both products you mentioned plus a help article on flat…

Did you have a 4-pin connector that had 5 wires or was it a 5-pin connector? There is a big difference since you normally see a 5-pin connector on a boat trailer with the 5th pin used for an electric reverse lockout solenoid on a brake actuating…