Recommended Hitch With Receiver Mounted in Bumper for 2022 Jeep Cherokee Trailhawk

Question

Question:

I want a hitch that sits behind the bumper for my 2022 Cherokee Trailhawk. Not one of those that hangs down below the bumper. Is there an aftermarket option for this? Thanks.

asked by: Cesar

0

Expert Reply:

The Draw-Tite Max-Frame Trailer Hitch # DT28MR is what you're looking for. This hitch bolts on in place of the bumper beam. The plastic panel in the center of the fascia will be removed for hitch access, so the receiver will stick out from the bumper instead of hanging down below.

expert reply by: Robin H

0

Answer 1

There are two types of trailer hitch options for a 2021 Jeep Cherokee Trailhawk, ones that installs under the bumper like the etrailer Trailer Hitch Receiver part #e73ZR and ones that installs inside the bumper like the Draw-Tite Max-Frame Trailer…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 6

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 7

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 10

The hitch I recommend for your 2020 Jeep Cherokee Latitude is the mostly hidden etrailer #e73ZR. Once this hitch is installed the only thing visible will be the hitch opening hanging below the rear bumper. See attached picture. I also attached an…

view full answer...

Recommended Hitch With Receiver Mounted in Bumper for 2022 Jeep Cherokee Trailhawk

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching