ST185/80R13 Radial Trailer Tire With 5 On 4-1/2 Bolt Pattern Trailer Wheels

Question

Question:

Do you have 5 on 4-1/2 Inch 185/80-13 radial tires and rim?

asked by: Keith

0

Expert Reply:

While we currently do not have a wheel and tire package, you can have the Castle Rock ST185/80R13 Radial Trailer Tire # LHCK105 or Kenda Karrier ST185/80R13 Radial Trailer Tire # AM10208 installed on one of the wheels from the list below. All these wheels will have the 5 on 4-1/2" bolt pattern.

Aluminum Hi-Spec Series S5 Trailer Wheel # AM22323HWTB
Steel Spoke Trailer Wheel # AM20234
Steel Directional Trailer Wheel # AM48VR
Aluminum Viking Series Vor Trailer Wheel # AX02350545FPS
Aluminum Hi-Spec Series 06 Trailer Wheel # AM20281B
Aluminum Hi-Spec Series S5 Trailer Wheel # AM22323HWT
Dexstar Conventional Steel Wheel with Offset # AM20214
Dexstar Steel Directional Trailer Wheel # AM20259
Dexstar Conventional Steel Wheel with Offset # AM20212
Dexstar Steel Mini Mod Trailer Wheel # AM20245

expert reply by: Bud M

0

Answer 1

We can certainly recommend a tire to go with this Aluminum Hi-Spec Series 06 Trailer Wheel - 13" x 5" Rim - 5 on 4-1/2 - Black #AM20281B that you referenced. We can pair this with the Kenda Karrier ST185/80R13 Radial Trailer Tire - Load…

view full answer...

Answer 2

Most people run a standard style center cap with the HWT Wheel part #AM22323HWTB you referenced like in the picture I attached. For a center cap that would fit that wheel the part #319EZ would be a great option.

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 5

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 6

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 7

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 8

Your math is correct in your trailer weight load example. If a fully-loaded tandem axle trailer weighs 4000-lbs then each of the 4 tires will bear 1/4th of that load, or 1000-lbs. In this case a tire rated for 1300-lbs would provide a good safety…

view full answer...

Answer 9

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 10

I have attached a chart you can check out that describes the torque needed per wheel size, wheel stud size and material. For an 8-inch wheel with a 1/2-inch wheel stud the torque is 75 to 86 ft-lbs. For a 15 inch steel wheel with 1/2 inch wheel studs…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

ST185/80R13 Radial Trailer Tire With 5 On 4-1/2 Bolt Pattern Trailer Wheels

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching