Gooseneck Coupler Storage Locks For Gen-Y Executive 5th Wheel To Gooseneck Hitches

Question

Question:

Will this fit the Gen Y Executive Googneck Hitch?

asked by: Dwight M

0

Expert Reply:

For your Gen-Y Executive Gooseneck Hitch you will need to select either the Auto Latch Gooseneck Coupler Lock # 325-GH-7111 (up to 25K) or the Manual Latch Gooseneck Coupler Lock # GY89FR (up to 30K). These are specific to the Gen-Y gooseneck hitches.

expert reply by: Bud M

0

Answer 1

Your leveling system is not supposed to lift the wheels off the ground; this could exceed the capacity of your leveling system and cause damage and I do not recommend doing so. If you can make any adjustments to the legs then you will want to go…

view full answer...

Answer 2

I have a solution for you, but the Gen-Y Auto Latch Gooseneck Coupler Lock - 25,000 lbs #325-GH-7111 does not look to be a fit for the Reese Goosebox 18k. The Gen-Y Lock requires a lip, which the Reese does not have. I recommend using Master Lock…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

You can replace the Lippert Rhino pin box on your Brinkley 5th wheel. The right one though is going to depend on the pin weight of your trailer. Here are the options that will work to replace the Lippert Rhino: - Pin Weight of 1,500 lbs - 3,500 lbs:…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box #GY38FR is not going to allow for any additional turning clearance than the 5th wheel king pin with a fixed point hitch. We have offset gooseneck ball options depending on what type of…

view full answer...

Answer 8

No, it does not but I have one that does. It is the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box item #GY86GR. This pin box is custom designed for the Lippert Rhino bolt pattern. It has an identical 21,000 lbs towing capacity and a 3,500 lbs tongue…

view full answer...

Answer 9

Hey Susan, so we don't have any locks designed to lock a gooseneck coupler's inner tube to the outer tube that is welded to the trailer chassis so the best option we have would be a wheel lock like the part #288-02020 which will prevent the…

view full answer...

Answer 10

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 11

Hi Evon, Appreciate the photo, thank you, and while there is a lock option, the part number you mentioned won't work on your gooseneck coupler with the handle. There isn't a similar type of lock for the bottom of the coupler, the best have is…

view full answer...

Answer 12

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...