Hole Diameter and Hose Length for Empire Faucets RV Bathroom Vessel Sink Faucet

Question

Question:

1. What diameter hole is required in the sink? 2. What is the length of the hot and cold supply lines? 3. Is there a flexible supply line option?

asked by: Ken

0

Expert Reply:

I went out to our warehouse for you to measure the Empire Faucets RV Bathroom Vessel Sink Faucet part # EM82WR. The hole used for installation will need to be at least 1.5" diameter. The hot hose is 9" long and the cold hose is 7" long. The hoses are flexible.

expert reply by: Conner L

0

Hole Diameter and Hose Length for Empire Faucets RV Bathroom Vessel Sink Faucet
(click to enlarge)

Answer 1

The Empire Faucets RV Faucet #EM82WR is designed for single hole sink applications like what you have on your Grand Design Solitude 310GK and would work great. Thankfully the single hole applications are all pretty standard so we know this would…

view full answer...

Answer 2

The etrailer sticker you see on the pictures and videos of the Empire Faucets Stainless Steel RV Bathroom Vessel Sink Faucet - Single Lever Handle #EM82WR are only on that specific faucet used in the pictures and videos. That being said the sticker…

view full answer...

Answer 3

Hi Joe, Yep, you heard correct, you can go from a 2 inch shank to a 2-1/2 inch shank with your Reese weight distribution hitch without issue. One of the following 2-1/2 inch shanks should have the right rise/drop for your application. Here are the…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Hi James, To my knowledge the Reese Goosebox is the only replacement option that won't void the frame warranty. That being said, the frame warranty is typically only a year so you really aren't losing much voiding it, especially if you've…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 8

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

view full answer...

Answer 9

The Patriot Slider part #BWRVK3270 might be a bit more noisy than the Companion slider part #BWRVK3400 due to the increased number of mounting points, 4 at the corners vs. 1 in the center. Probably not that noticeable and certainly not something…

view full answer...

Answer 10

Installing ta Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Adapter Pin Box like the #325-GH-8045 would not void the warranty of your camper, and Gen-Y makes some of the most durable parts on the market. I really like this as an alternative to…

view full answer...