Replacement for Power Gear 501473 Leveling Jack Motor

Question

Question:

Hello I need help please trying to find a compatible electric jack and motor for my 2007 Fleetwood/Ford V10 Driver side front I have pics and also here are some part numbers powergear 501473 1010001093 I have serial numbers too if that helps Thank you so much Sherri 601-two1888three5

asked by: Sherri M

0

Expert Reply:

It looks like we do have a replacement motor for the Power Gear 501473, it's the Replacement Motor for Lippert Power Gear Electric Leveling Jack System part # LC89CJ.

Unfortunately, we don't offer a replacement for the actual leg as the system is discontinued.

expert reply by: Conner L

0

Answer 1

The only difference between the left #LC386198 and right #LC89CJ motors for the Lippert Power Gear is going to be the brake orientation; Other than that they are going to be the same motor. As far as your situation goes, If you have the extra money…

view full answer...

Answer 2

The Replacement Motor for Lippert Power Gear Electric Leveling Jack System - Right #LC89CJ will be able to replace the right side motor.

view full answer...

Answer 3

Thanks for all the information. You will want to grab the Replacement Motor for Lippert Power Gear Electric Leveling Jack System item #LC89CJ. This will replace the passenger side motor for your Lippert Leveling Jack.

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 8

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 9

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 10

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 11

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 12

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Replacement for Power Gear 501473 Leveling Jack Motor

Product Page this Question was Asked From

Continue Researching