Will the Rhino Rack item # RR576 Snowboard Carrier fit the Factory Roof Rack of a 2016 Crosstrek?

Question

Question:

Will RR576 with on a 2016 Subaru Crosstrek with Subaru crossbars?

asked by: Joan

0

Expert Reply:

Yes it will fit. The Rhino-Rack Ski and Snowboard Carrier item # RR576 fits crossbars up to 3-3/4" wide x 7/8" tall. This carrier fits square, aero, elliptical, and most factory crossbars.

I have linked a review video below.

expert reply by: Jerred H

0

Answer 1

The Rhino Rack 6 Ski, 4 Board carrier, part #RR576 can fit on your factory Subaru crossbars. The connectors are able to attach to up to 3.5 inch by 2 inch tall crossbars.

view full answer...

Answer 2

We have exactly what you are looking for, the Thule SnowPack Extender Ski and Snowboard Carrier #TH7325. This carrier will haul up to 4 snowboards (as well as 6 skis) and slides out up to 15 inches away from the base of the carrier as you can see…

view full answer...

Answer 3

With the Rhino Rack Carrier #RR576 you could easily carry 3 boards with it. Two boards could go on one side of the rack and a single board could go on the other side by itself. This would prevent uneven pressure like you mentioned with the third…

view full answer...

Answer 4

The Rhino-Rack #RR576F fishing rod carrier will fit crossbars up to 3-1/2 inches wide and 1-1/2 inches tall, so it'll absolutely fit your smaller-profile factory crossbars on your 2016 Subaru Outback. If you click the provided link, you can…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 9

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...