Double row LED light bar with durable aluminum housing produces a bright white light. The combination spot beam and fog light let you see at a distance, as well as off to both sides. Hardware, brackets, and wiring harness included.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody. Andy here with etrailer.com and today we're gonna take a look at this Blazer off-road LED mixed beam light bar. This double row LED mixed beam light bar is going to give you bright white light. It's gonna be great for off-road driving. The high quality light output comes from two rows of 24 three watt LEDs with an equivalence of 9,600 raw lumens and 8,369 effective lumens. Now as you can see I have this connected to my power source with the light turned on.
Yu can see just how bright this is with my studio lights on. But let me go ahead and turn my studio lights off to give you a better demonstration of the brightness of this really nice white light that it gives off. I'm gonna go ahead and zoom out here and shine this on the wall behind me so you can see that beam. The the fog beam projects a beam pattern that is very wide horizontally and narrow, vertically lighting up the road beneath the fog. And the spot beam is great for seeing at a distance.
The fog spotlight beam pattern is actually effective up to a distance of 2,800 feet. I'm gonna go ahead and put this back on my table and turn my lights back on and then I'm gonna go ahead and disconnect this from my power source so I'm not continuing to blind you. I'm gonna go in for a closeup here so you can see those LEDs. Now, in regards to the body of the light itself, on the back here we have these channeled fins here on the back that's going to let heat quickly dissipate and that's going to help optimize the performance of the LEDs. This features a tough carbonate lens.
It's a polycarbonate lens rather, that's IP67 rated to protect against dust and moisture. It's also impact resistant, so it's gonna be very durable. And this features a black powder coated aluminum housing. The brackets are also powder coated aluminum and so this is going to be very rugged. It's gonna be corrosion resistant and this is going to be an easy installation with the mounting brackets that I have loosely installed here on each side of this light and also with the hardware and just to give you some overall dimensions of this light so you have a good idea of the size and so you can be confident that it's gonna work for you.
Beginning with the overall measurements, I went ahead and measured this earlier before our time together. Measuring from end of bracket to end of bracket, we're sitting at about 28 and three quarters inches long. The overall height, you're gonna be sitting right at about four and three eight inches tall. Now the measurements of the light bar itself, the overall length from the longest points on the light bar, we're sitting at about 26 and one eight inches long, three inches tall and about three and seven sixteenths inches deep. Now this will hard wire into your 12 to 24 volt system and it has a amperage draw of about 8.4 amps. Instructions are included to walk you through the installation process and to go over the features of this light bar a little bit, in a little bit more detail than we we're able to do today. Well, that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.