What Size Socket Is Needed To Install Hitch In 2020 Ford Ranger

Question

Question:

Just getting started here on the install. Can you confirm the right size socket for this hitch?

asked by: Sean L

0

Expert Reply:

Per the instructions for the Curt Trailer Hitch Receiver # C13417, you will need a 21mm socket for this install as well as a 6" extension. Included are the full instructions that should help get you started.

expert reply by: Patrick R

0

Answer 1

There is not any added hardware required to install the Curt hitch that fits your 2022 Ford Ranger, which is the following part number: - Curt Trailer Hitch Receiver #C13417 Installation of the #C13417 on a '22 Ranger just requires removing the…

view full answer...

Answer 2

It is possible to have both a 7-way and 4-way on your 2019 Ford Ranger by using the #C56431 but you will need to replace the 7-way connector with the #C55774 and you'd have one that has both. This uses the same round connector as what comes with…

view full answer...

Answer 3

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 4

Good question, and thanks for the photo. I verified for you that the chain hooks on your 2022 Ford Ranger do NOT have to be removed in order to install the Curt hitch that fits, which is the following part number: - Curt Trailer Hitch Receiver…

view full answer...

Answer 5

I recommend the Curt Trailer Hitch Receiver #C13417 for your 2020 Ford Ranger. This is a class III hitch, with a 2"x 2" receiver tube. The weight ratings are, Maximum gross trailer weight: 6,000 lbs, Maximum GTW when used with weight…

view full answer...

Answer 6

There is a great option for a trailer hitch on your 2019 Ford Ranger; I strongly recommend the Curt Trailer Hitch #C13417 because it is a simple installation that does not require any drilling or modification of your truck and is a highly durable,…

view full answer...

Answer 7

Curt confirms that the #C13900 will only fit frame widths of up to 41 inches, so it wouldn't be compatible with your truck. I'd recommend going with a custom fit hitch like the Curt #C13417, which has a higher capacity at 6000 lbs towing/8000…

view full answer...

Answer 8

If your 2020 Ford Ranger Lariat has the factory towing package it will have a factory installed trailer hitch receiver, and a 4-way/7-way connector. If you do not have these components then your truck does not have the factory towing package. To add…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

What Size Socket Is Needed To Install Hitch In 2020 Ford Ranger

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching