Does Curt Hitch C64DR Fit AWD Model of 2022 Toyota Corolla Cross

Question

Question:

WILL THIS HITCH WORK ON THE AWD MODELS TOO?

asked by: JOHN

0

Expert Reply:

Yes, the Curt hitch part # C64DR that you referenced does fit the all wheel drive models of the 2022 Toyota Corolla Cross.

expert reply by: Jameson C

0

Answer 1

Yes, the Curt Trailer Hitch Receiver #C64DR is confirmed to fit your 2024 Toyota Corolla Cross. This is custom fit so you will not have to drill into your vehicle frame to install the hitch. I recommend installing the Curt Vehicle Wiring Harness…

view full answer...

Answer 2

Hey Chuck, since your 2024 Toyota Corolla Cross Hybrid XSE has LED taillights the correct trailer wiring harness is the part #C55ZV. Sorry for any confusion!

view full answer...

Answer 3

Definitely smart to check to get the right wiring harness, and while we can't do anything with VINs, I can tell you there are two options for 4-way harnesses on your 2023 Toyota Corolla Cross Hybrid. The difference is just if your model has…

view full answer...

Answer 4

There is a fit for a trailer wiring harness for your 2023 Toyota Corolla Cross hybrid XSE, from Curt: - Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C39DR I verified directly with Curt for you that this harness is a fit…

view full answer...

Answer 5

The Curt Trailer Hitch Receiver #C64DR for your 2022 Toyota Corolla Cross truly is a Class I hitch with a 2" receiver like you see on the product page. You are correct that Class I hitches typically have a 1-1/4" receiver but it looks like…

view full answer...

Answer 6

It sounds like you have the 2023 Toyota Corolla Cross which uses the Curt hitch #C64DR. This hitch mounts to the frame behind the bumper, but you remove the factory bumper support and it does not get reinstalled like it sounds like you're trying…

view full answer...

Answer 7

Yes, the Curt Trailer Hitch Receiver part #C64DR which is a fit for a 2023 Toyota Corolla Cross will replace the rear impact structure. It's actually stronger than the rear impact structure which will lead to less damage in the event of an…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Does Curt Hitch C64DR Fit AWD Model of 2022 Toyota Corolla Cross

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching