Trailer Wiring Harness For 2023 Toyota Corolla Cross Hybrid XSE

Question

Question:

Is there a trailer wiring adapter that will work or is confirmed to work with a 2023 Toyota corolla cross hybrid XSE? There are comments that I have read on some people had some issues with the kits on some trims. Thanks

asked by: Jason P

0

Expert Reply:

There is a fit for a trailer wiring harness for your 2023 Toyota Corolla Cross hybrid XSE, from Curt:

- Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C39DR

I verified directly with Curt for you that this harness is a fit for the Hybrid XSE.

expert reply by: Kyle S

0

Answer 1

Definitely smart to check to get the right wiring harness, and while we can't do anything with VINs, I can tell you there are two options for 4-way harnesses on your 2023 Toyota Corolla Cross Hybrid. The difference is just if your model has…

view full answer...

Answer 2

Yes, the Curt Trailer Hitch Receiver #C64DR is confirmed to fit your 2024 Toyota Corolla Cross. This is custom fit so you will not have to drill into your vehicle frame to install the hitch. I recommend installing the Curt Vehicle Wiring Harness…

view full answer...

Answer 3

Hey Chuck, since your 2024 Toyota Corolla Cross Hybrid XSE has LED taillights the correct trailer wiring harness is the part #C55ZV. Sorry for any confusion!

view full answer...

Answer 4

Yes, the Curt hitch part #C64DR that you referenced does fit the all wheel drive models of the 2022 Toyota Corolla Cross.

view full answer...

Answer 5

The Curt Trailer Hitch Receiver #C64DR for your 2022 Toyota Corolla Cross truly is a Class I hitch with a 2" receiver like you see on the product page. You are correct that Class I hitches typically have a 1-1/4" receiver but it looks like…

view full answer...

Answer 6

I couldn't locate an order from you but I'm guessing you're needing to install either the Curt T-Connector #C39DR or the Tekonsha T-One #TK25VR on your 2022 Toyota Corolla Cross. Wiring instructions can be a bit hard to follow at times…

view full answer...

Answer 7

The correct Curt wiring harness for your 2023 Toyota Corolla Cross is the #C39DR. This plugs into the connection points behind your rear tail lights and will provide you with a 4-way to power your trailer's signal lights.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Trailer Wiring Harness For 2023 Toyota Corolla Cross Hybrid XSE

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching