Correct Steering Stabilizer for a 2020 Newmar Canyon Star on Ford F-53 Chassis

Question

Question:

I have a 2020 Newmar Canyon Star built on 2019 Ford f53 chassis rated at 26,000 GVW. Which Roadmaster steering stabilizer kit do I need to order?

asked by: Truitt C

0

Expert Reply:

The correct steering stabilizer for a 2020 Newmar Canyon Star on Ford F-53 Chassis is the Roadmaster Exact Center Steering Stabilizer part # RM62RR which comes with custom brackets for a no-drill installation. The stabilizer will do a great job of helping keep the motorhome in a center line.

expert reply by: Conner L

0

Answer 1

I would be happy to make those recommendations for you. To add a front sway bar to your 22,000 lbs 2019 Fleetwood Bounder you will want the Roadmaster Front Anti-Sway Bar item #RM-1139-148. This anti sway bar comes with all parts necessary to…

view full answer...

Answer 2

You are correct; the drill bit will actually be a 1/8" drill bit for the installation of the Wheel Masters 2-Hose Inflation Kit - 22-1/2" Dually - Hub Mount #WM8005.

view full answer...

Answer 3

We have valve extenders for your dual wheel tires. I recommend the Wheel Masters 4-Hose Inflation Kit - 16" to 19-1/2" Dually - Wheel Cover Mount #WM8208. The length of the hoses with straight valve extenders is 13 inches. I've attached…

view full answer...

Answer 4

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 5

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 6

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 7

A drop axle certainly can make it tough to reach the star wheel adjuster on a drum brake. The adjuster spoon tool we offer #W80630 has a 90-degree bend that will often let you get access to the adjuster even on a drop axle. Essentially you will need…

view full answer...

Answer 8

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a 1…

view full answer...

Answer 9

Yes, the Solera Slide Topper part #LCV000168106 is the correct fit for your flange width of 90-1/2 inches. This specific model has a box width range of 86 to 91-3/4 inches which is perfect for your width listed.

view full answer...

Answer 10

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Answer 11

The amount of bow that's put into trailer axles like the #7359765 is based on about how much a trailer is typically going to weigh that has a 3,500 lb capacity. So there's a bit of approximation and obviously it can't be totally perfect…

view full answer...

Answer 12

Roadmasters priority when it comes to their sway bars is top notch quality and the easiest install for the customer. This typically cuts the install time down enough that you end up saving money if you pay to have the bars installed or decide to do…

view full answer...

Correct Steering Stabilizer for a 2020 Newmar Canyon Star on Ford F-53 Chassis

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching