Replacement Breakaway System for Brake Buddy Vantage 39504

Question

Question:

Will this break away replacement switch fit my Brake Buddy Vantage Model 39504?

asked by: Ralph G

1

Helpful Expert Reply:

Yes, the Replacement Brake Buddy Vantage Select Break-Away System # HM39327 will fit your Brake Buddy Vantage Model 39504.

expert reply by: Robin H

1

Answer 1

The Replacement Breakaway System #HM39340 is the correct part for your Brake Buddy 2.

view full answer...

Answer 2

For your 2021 Chevrolet Blazer you're going to need to start with a base plate kit. Since there aren't any Blue Ox base plates I'd recommend going with the Roadmaster Direct-Connect Base Plate Kit #RM-523204-5. These are just as good as…

view full answer...

Answer 3

I'm sorry to hear about your Jeep. I hope everyone is okay. I checked with Blue Ox and they do not currently have a base plate kit available that is confirmed to fit the 2018 Ford Expedition. It does look like a new generation began for the 2018…

view full answer...

Answer 4

In order to get power from your motorhome to your 2005 Jeep while you're flat towing you'll need a working 7 way with 12 volts. Since the front of your Jeep has a 4 way flat on it you will need to change out the plug because all 4 wires are…

view full answer...

Answer 5

Since you already have the Roadmaster Nighthawk All-Terrain Tow Bar item #RM-676 you will need the Roadmaster Direct-Connect Base Plate Kit item #RM-344-3B to flat tow your 2006 Nissan Frontier. Here are some other parts you will need to flat tow…

view full answer...

Answer 6

Different vehicles have different requirements and procedures for flat towing. In order for your 2014 Jeep Wrangler Sahara to be flat towed, and really any vehicle, the steering wheel has to be unlocked which requires a certain key position. An…

view full answer...

Answer 7

It sounds like you are needing a battery disconnect like the Roadmaster Automatic Battery Disconnect with Switch #RM-766. This kit will allow you to disconnect the batteries with just a flip of a switch. I have attached the complete installation…

view full answer...

Answer 8

The correct battery disconnect to use for your 2021 Chevy Silverado 1500 is the Roadmaster Automatic Battery Disconnect with Switch #RM-766. This makes disconnecting your battery as easy as pressing a button instead of having to physically get under…

view full answer...

Answer 9

Deciding between flat towing your vehicle with all four wheels down or using a tow dolly partly boils down to your preference and application. For your Jeep Wrangler, I recommend going with a flat towing setup. This is going to be simpler to…

view full answer...

Answer 10

I recommend using the Hopkins Breakaway Switch #HM20014 for your BrakeBuddy Vantage 39504. Breakaway switches are pretty universal so this will work well for your application. Please note that your Vantage uses banana clips to connect the switch to…

view full answer...

Answer 11

Yes. A 12V charge line using #10-1-1 wire and a circuit breaker like #PK54240PL will allow you to provide a maintenance charge to your battery while using the battery disconnect #RM-766 and supplemental 12V outlet.

view full answer...