Replacement Breakaway Switch for the BrakeBuddy Vantage 39504

Question

Question:

need to replace brake away switch for a brake buddy vantage. what one do i need?

asked by: Dan D

0

Expert Reply:

I recommend using the Hopkins Breakaway Switch # HM20014 for your BrakeBuddy Vantage 39504. Breakaway switches are pretty universal so this will work well for your application. Please note that your Vantage uses banana clips to connect the switch to the unit itself. If you need to replace those as well then you should be able to find these at your local electrical supply store.

expert reply by: Jon G

0

Lyndon G.

7/31/2020

When using this switch on a Brake Buddy Vantage Select. Do you know what type/size of connector is used.

Reply

Answer 1

Deciding between flat towing your vehicle with all four wheels down or using a tow dolly partly boils down to your preference and application. For your Jeep Wrangler, I recommend going with a flat towing setup. This is going to be simpler to…

view full answer...

Answer 2

Yes, the Replacement Brake Buddy Vantage Select Break-Away System #HM39327 will fit your Brake Buddy Vantage Model 39504.

view full answer...

Answer 3

The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…

view full answer...

Answer 4

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 5

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

The installation instructions for this product are recommended for individuals who have experience winding torsion springs. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install…

view full answer...

Answer 8

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 9

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 10

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 11

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Answer 12

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Replacement Breakaway Switch for the BrakeBuddy Vantage 39504

Product Page this Question was Asked From

Continue Researching