Key Position for Flat Towing a 2014 Jeep Wrangler Sahara

Question

Question:

My question is why does the key have to be left in the ACC position ?

asked by: David D

0

Expert Reply:

Different vehicles have different requirements and procedures for flat towing. In order for your 2014 Jeep Wrangler Sahara to be flat towed, and really any vehicle, the steering wheel has to be unlocked which requires a certain key position.

An automatic battery disconnect, # RM-766, is not a requirement to flat tow your Jeep. But if using a supplemental braking system, required in most states by law, and if it requires 12 volt power, you could install a 12 volt outlet kit, # RM-9332. This will connect to a 12 volt circuit that is hot when the key is turned on or in the accessory position.

For additional information on the procedures for flat towing your Jeep consult the owners manual in the recreational towing section.

expert reply by: Michael H

0

Answer 1

According to page 547 of the online owner's manual for your 2014 Jeep Wrangler, when flat towing with a tow bar, like the Blue Ox Avail #BX7420, the engine must be turned OFF but you must leave the ignition switch in the unlocked ACC position.…

view full answer...

Answer 2

I looked though the online version of the owner's manual for your 2018 Jeep JK Wrangler and there isn't a clear indication as to whether or not the key should be left in the ignition while it's being flat towed. There is a detailed…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 5

Hey there Jeff, thanks for the question and I can definitely get you all the parts needed to flat tow your 2014 Chevy Silverado 1500 behind your motorhome. I'll go ahead and list everything out for you to make it easy to order. - Base Plate Kit:…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

I would be happy to! To flat tow your 2024 GMC Canyon Denali you will need the following parts: Tow Bar and Safety Chains - Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights item #RM-676 Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit…

view full answer...

Answer 8

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

view full answer...

Answer 9

Hello John. The #C96JR tail light kit for the 2023 Jeep Gladiator will indeed work with a Brake Buddy brake System Such as part #HM39524. So, if you plan to use a portable brake system, that is definitely what I recommend, and you do not need to get…

view full answer...

Answer 10

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Key Position for Flat Towing a 2014 Jeep Wrangler Sahara

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching