Demco Tabless Base Plate Kit Installation - 2020 Jeep Wrangler Video

What you need is a light kit specifically for flat-towing. The Plug-N-Tow TM Vehicle Wiring Harness, #42615, would be if the Jeep were towing a trailer and not for activating its lights while it is being towed. There are a few options for lighting…

The 3/8" bolts in the Blue Ox Base Plate Kit #BX1689 will need to be torqued to either 33-lbs/ft (Grade 5 Bolts) or 47-lbs/ft (Grade 8 Bolts). A Grade 5 bolt with have 3 radial lines on the head of the bolt, where a Grade 8 bolt will have 6…

If the base plate Item #RM-521453-4 did not come with thread locker then we recommend using red loctite Item #LT37420. The instructions will tell you what thread locker to use. I have found the if it is not in the kit it will be red. As far as the…

The Blue Ox 4-diode tow bar wiring kit #BX8848 that you have installed in your JL Unlimited will not cause issues with the brake lights on the Jeep since it will be in Tow Mode when you are flat towing it. This will allow the motorhome to control the…

We do have a solution for you, however, you will not be able to power reverse lights on a trailer with a 4-pin trailer connector. The reverse lights on a trailer must receive power from the reverse lights on the tow vehicle. To do this, you will want…

When flat towing a vehicle the supplemental braking system being used will have a specific breakaway switch that goes with it. Supplemental braking is required by law in most states so if you are not using one you will want to look into getting one.…

Both the SMI Stay-IN-Play DUO, part #SM99251 and the Roadmaster InvisiBrake Supplemental Braking System, part #RM-8700 are nice braking systems and will function similarly but I recommend the Duo system. Both systems are a one-time installation. The…

The Demco tabless base plate kit part #DM9519336 that fits your 2021 Jeep Gladiator does not require any drilling to install. There's some trimming of the front fascia but not drilling. I attached an install video for you to check out that shows…

Yes, the Demco tabless base plate will work with blue ox tow bars. Demco Tabless Base Plate Kit - Removable Arms #DM9519336.

Roadmaster actually replaced the part number you mentioned with the #RM-521453-5 which is the correct direct connect style base plate kit for your 2019 Jeep Wrangler. I attached an install video for this kit on a similar Wrangler for you to check out…

The Demco Tabless Base Plate Kit - Removable Arms Item #DM9519339 will fit the 2018-2021 Jeep Wrangler models but since it was designed for a steel bumper it will hang much lower than the plastic bumper and won't be as clean of a look. If you…

The best base plate for your 2019 Jeep Wrangler Unlimited JL Sahara for use with your Demco Dominator tow bar is going to be from Demco to ensure compatibility between the base plate and tow bar. I verified with Demco that the correct base plate for…