Correct T-Connector 4-Way Wiring Harness For a 2022 Toyota Tacoma

Question

Question:

Just wanting to be sure the Curt T-Connector C56349 is the correct harness for my 2022 Toyota Tacoma

asked by: Willie

0

Expert Reply:

Yes, the Curt T-Connector Vehicle Wiring Harness # C56349 is the correct 4-way wiring harness for your 2022 Toyota Tacoma. This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies to access this harness. Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.

expert reply by: Scott S

0

Answer 1

Yes, the power wire for the Curt T-Connector Vehicle Wiring Harness #C56349 must still be ran to the battery on your 2019 Toyota Tacoma SR. The power wire for this is where the converter gets the power it is sending to the trailer lights. This…

view full answer...

Answer 2

I recommend the Curt T-Conenctor Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part #C56349 for the 2020 Toyota Tacoma which plugs in behind the tail lights so there is no need for a tow package on the vehicle. The black wire does need to…

view full answer...

Answer 3

If you are referring to a trailer wiring harness then no, the trailer wiring harness for a 2017 and 2018 Toyota Tacoma will be the same. For this, I recommend using the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part…

view full answer...

Answer 4

What you are describing sounds like a short in the converter box for Curt wiring harness #C56349 for your 2016 Toyota Tacoma. Since this is the second time this has happened it could indicate that there is something on the trailer that is causing the…

view full answer...

Answer 5

The best way to run the wire for the 12v power supply from the Hopkins Plug-In Simple #HM43354 to the battery on your 2020 Toyota Tacoma is going to be under the vehicle, while keeping it away from moving parts and parts that could heat up. I've…

view full answer...

Answer 6

You will need the Curt T-Connector, part #C56349. This will work nicely for you. Check out the install video that I attached for you.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...