30 Amp Twist Lock Male to 50 Amp Female Adapter

Question

Question:

Thank you for your fast response..!!! Attached is the pic of what we need to connect it to..

asked by: Adriana F

0

Expert Reply:

What do you need on the other side of the connector that matches what's in your picture? And how long?

expert reply by: Jameson C

0

50 amp male
(click to enlarge)

50 amp socket female
(click to enlarge)

Adriana F.

10/31/2022

Thank you for your fast response..!!! Attached is the pic of what we need to connect it to..

Reply

Jameson C.

10/31/2022

Thanks for the pictures of the two connectors you have. Based on that the correct adapter you need would be the part # A10-G30350VP.

Reply

Answer 1

Hello Robert. For that I suggest using butyl tape and non-sag sealant. For butyl tape I recommend the Alpha Systems Butyl Tape for RV Weatherproofing #AL28FJ. This is a 20' long roll of 1" thick tape. For sealant I recommend the…

view full answer...

Answer 2

In order to hook up a camper with 50 service to a generator with 30 amp outlet you will need to use the Mighty Cord Generator Adapter part #A10-G30350VP if you have a 3 prong or the Power Grip Generator Adapter part #CAM55422 if you have a 4 prong.

view full answer...

Answer 3

The Mighty Cord Generator Adapter #A10-G30430VP that you referenced is an L14-30 adapter as it is a 30 amp twist lock style adapter. L14-50 means 50 amp twist lock like the #CAM55572 which has both sides male and female this style. If you ran a 30…

view full answer...

Answer 4

We have exactly what you need for much, much less than the dealer wants to charge you. It actually sounds like the dealer wants to install an on-board generator, considering the cost you mentioned. You only need a generator adapter for your trailer…

view full answer...

Answer 5

We have so many different adapters and based on your question, I think this is the chord you need. Mighty Cord Generator Adapter for RV Power Cord - 50 Amp Female to 30 Amp Twist Lock Male - 12" #A10-G30350VP. If that isn't it, here…

view full answer...

Answer 6

The correct replacement for the Oil Seal 225255UC is the Oil Seal part #9103309. These both have a 2.24/2.25" inner diameter and 3.37" outer diameter. They are also designed for use with oil bath hubs.

view full answer...

Answer 7

I've actually answered a similar question on this before and found: In my research I found that the grease seal you are looking for could have an inner diameter of either 2.24 or 2.12 inches and an outer diameter of 3.37 inches when measured with…

view full answer...

Answer 8

Reese has a gooseneck ball that fits the OEM pucks of your 2020 GMC Sierra 3500 with the part #RP23FR but this doesn't have any rise built into it. The ball you mentioned does not fit your truck.

view full answer...

Answer 9

The Edge Pulsar programmer and monitor part #EP54KR can give you up to an additional 136 horsepower and 291 ft lbs of torque.

view full answer...

Answer 10

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 11

The shortest profile gooseneck hitch ball we have for the puck system on your 2023 Chevy Silverado 3500 comes with the Reese Elite Series Pop-In Ball Kit #RP23FR as there isn't any kind of platform under the hitch ball like we see with the other…

view full answer...

Answer 12

We still recommend the use of a slider in all standard/short bed trucks. That being said, the new GM trucks like your 2022 GMC Sierra 2500 do have a slightly longer bed than the typical standard bed. The best thing you can do is to measure to see if…

view full answer...