How To Attach a 50 Amp Camper to Generator with 3 Prong 30 Amp Plug

Question

Question:

Are there any male 4 prong or 3 prong to a 50 amp female?

asked by: Rick

0

Expert Reply:

In order to hook up a camper with 50 service to a generator with 30 amp outlet you will need to use the Mighty Cord Generator Adapter part # A10-G30350VP if you have a 3 prong or the Power Grip Generator Adapter part # CAM55422 if you have a 4 prong.

expert reply by: Conner L

0

Answer 1

Hello Robert. For that I suggest using butyl tape and non-sag sealant. For butyl tape I recommend the Alpha Systems Butyl Tape for RV Weatherproofing #AL28FJ. This is a 20' long roll of 1" thick tape. For sealant I recommend the Alpha…

view full answer...

Answer 2

The Mighty Cord Generator Adapter #A10-G30430VP that you referenced is an L14-30 adapter as it is a 30 amp twist lock style adapter. L14-50 means 50 amp twist lock like the #CAM55572 which has both sides male and female this style. If you ran a 30…

view full answer...

Answer 3

What do you need on the other side of the connector that matches what's in your picture? And how long?

view full answer...

Answer 4

Hey Philip so while we don't carry the exact spring you are looking for it does match the specs of the #e59SR so this would be a great solution. It's correct length at 23-1/8 inches and is for a 3,500 lb trailer axle like you have as well.

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

Answer 7

We do - for your 2023 Ford F-350 you'll want the TorkLift StableLoad Suspension Upgrade w Quick-Disconnect #TL89CR.

view full answer...

Answer 8

The vast majority of trailers on the market use a standard coupler (installed on top of the trailer frame) which is compatible with the B&W Continuum Weight Distribution System w/ Sway Control #BW28FR. Underslung couplers aren't as common but…

view full answer...

Answer 9

Hey Robert, sorry it can be a bit confusing navigating all those facets for the camper tie downs, but I did go ahead and find those tie downs you were looking for. For the front, you'll want the TorkLift Camper Tie-Downs #TL87CR (TorkLift P/N…

view full answer...

Answer 10

Yes, the Universal Above-Bed Base Rails #DM6071 will fit your 2023 Ford F-350. This part number is just for the rails so for the full kit you need the #DM72GV. This includes the 6071 base rails along with the custom mounting brackets for your F-350.…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

There is not a plug and play adapter for your Lance connector that we are aware of. Typically this is installed by the Lance dealer. A junction box/7-way plug kit like #HS381-9000 is an option you have to convert the camper to match the 7-way RV…

view full answer...

How To Attach a 50 Amp Camper to Generator with 3 Prong 30 Amp Plug

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching