Weight of BAKFlip MX4 for 2019 Ram 3500 Dually Long Bed

Question

Question:

I am interested in the BAKFlip MX4 for a 2019 Ram 3500 Dually. I am concerned with opening it due to the wide rear wheel well and the weight of the cover. Can you give me the overall weight of the cover? I previously had an Extang 2.0 for a 6 foot bed no tool box on a different truck, Ram 2500. Can you provide the weight for this as well as a comparison I understand the weight difference compared to a 6 foot and 8 foot? Any information you can provide is appreciated for comparison before purchase. I will be asking a question on the BAKBox 2 as well to use in conjunction with this cover. Thank you, Corey W.

asked by: Corey W

0

Expert Reply:

Hi Corey; the BAKFlip MX4 Hard Tonneau Cover # BAK48204 weighs 71 lbs. There are several different Extang 2.0's so I'm not sure which one you had. Using a 2019 2500 the Trifecta Signature 2.0 # EX94430 weighs 35 lbs and so does the Trifecta 2.0 # EX92430. If it was a Solid Fold 2.0 it is approximately 65 lbs.

expert reply by: Robin H

0

Answer 1

The BAKBox 2 Collapsible Truck Bed Toolbox #BAK92201 will be in a fixed position once installed. The bolts for the brackets are tightened down on each side to keep the toolbox in place. You can install it anywhere along the rails underneath the…

view full answer...

Answer 2

Yes, it will! The BAKFlip MX4 Hard Tonneau Cover item #BAK48204 is custom fit for the 2022 Ram 3500&#39;s with an 8&#39; bed including the dually models.

view full answer...

Answer 3

Hi Corey; the BAKFlip MX4 Hard Tonneau Cover #BAK48204 weighs 71 lbs. There are several different Extang 2.0&#39;s so I&#39;m not sure which one you had. Using a 2019 2500 the Trifecta Signature 2.0 #EX94430 weighs 35 lbs and so does…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that&#39;s going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 7

The BAKFlip MX4 #BAK48204 is of a slightly higher quality than the G2 #BAK26204 for your 2023 Ram 3500 long bed. The MX4 has a 5 year warranty versus the 3 year for the G2. The MX4 has matte finish panels that does a better job of hiding…

view full answer...