Does the etrailer e94CR Trailer Hitch Fit a 2022 Audi Q5 Plug-In Hybrid

Question

Question:

I just want to confirm that the etrailer hitch e94CR works with a 2022 Audi Q5 plug-in hybrid. The description says plug-in, but it also says excluding plug-in.

asked by: Stephanie

0

Expert Reply:

Yes, the etrailer Trailer Hitch Receiver # e94CR will work with your 2022 Audi Q5 Plug-in hybrid. When it says that it fits the Plug-In Hybrid and excluding Plug-In Hybrid, it simply means that it fits both the Plug-In Hybrid and if you do not have the Plug-In Hybrid.

expert reply by: Scott S

0

Answer 1

Yes, it will. The etrailer Hitch item #e94CR has been confirmed to fit all models of the 2024 Audi Q5 including the plug in hybrid. This is a class III hitch with a 2" receiver. The crosstube on this hitch installs behind your rear bumper…

view full answer...

Answer 2

The best installation instructions I can give you for installing the #C59236 on your 2015 Audi Q5 would be to use a circuit tester like part #PTW2993 to test the wiring harness of the taillights you have on your vehicle and then wire up the #C59236…

view full answer...

Answer 3

The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e94CR is confirmed to fit your 2022 Audi Q5 PHEV. The installation of this hitch will require temporary removal of the bumper/fascia but does not require…

view full answer...

Answer 4

Yes, the etrailer Trailer Hitch Receiver #e94CR is also confirmed to fit your 2020 Audi Q5 plug-in hybrid. The receiver itself has a maximum tongue weight rating of 750lbs but be sure to check your owners manual to ensure that you do not exceed any…

view full answer...

Answer 5

Yes it does; I verified for you the etrailer hitch does indeed fit your 2023 Audi Q5 (both the non-hybrid and plug-in hybrid), with the correct part number being the following: - etrailer Trailer Hitch Receiver #e94CR

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...