What Size Handle Width Does Global Link Vise Lock for Cam-Action Door Latch Fit  

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

To get power to the controller of your Solera Smart Arm 12V Power RV Awning part #LC759404, you need to tap into an existing circuit, or run a power wire from the battery with an inline fuse holder, and a 15 amp fuse, like part #SWC9538, and part…

I've checked with Lippert, who tells me that you'd need to measure the length of the actual tube itself, rather than the center arm to center arm length. Given the length you measured, the #LC33FR you'd looked at would be the likely…

We do offer a hinge that may work well for you. I recommend part #PLR1904-Z. This is a barn door hinge for dump trucks and is made of 1/4 inch steel. This has a smooth surface that is designed for welding. I have also attached a photo of this hinge…

We do have an adapter that will allow you to attach a 2" cargo carrier to the 1-1/4" hitch on your 2016 Nissan Altima. I recommend the adapter #e43YR. This is 6-1/2" long and will go in to your 1-1/4" hitch and give you a 2"…

The "KTC 7600" stamped on the brake pad doesn't look to be a part number, so I can't cross reference it, but we do know you have Kodiak ceramic brake pads. So to determine the correct brake pads, all you need to do is match up…

If a thief has the time and opportunity they usually get what they want. If a thief was dedicated enough to breaking into your trailer that he would go the lengths you described to defeat the #BLDL-80 he would probably also find other ways (much…

The 15 inch version of the aluminum Bobcat trailer wheel with a 5 on 4-1/2" bolt pattern was discontinued by the manufacturer, so that particular wheel is not available. While I know it's not what you or your customer was looking to hear, we…