Stealth Hitch That Fits 2011 BMW 335D

Question

Question:

Can you confirm that this is the hitch model for my 2011 BMW 335D. I just want to make sure before spending almost 1K on this system.

asked by: Miguel M

0

Expert Reply:

We have a Stealth hitch that fits your 2011 BMW 335D with the part # SH64VR plus the towing kit part # 391CONVA7 but the part # SH78VR does not fit as it's designed for the convertible models.

expert reply by: Jameson C

0

Answer 1

I may have a solution for you, but the Curt #C11033 is only a confirmed fit on the 328xi Sedan and the Draw-Tite #24857 is only a confirmed fit on the 328i Sedan, so these hitches won't work for you; the bumper isn't necessarily the…

view full answer...

Answer 2

The Stealth Hitches Hidden Rack Receiver #SH94VR, which is a fit for a 2007 to 2013 BMW 3 Series Convertible (excluding the M3), will weight a little over 42 pounds and ships in a box measuring 41" x 12" x 8". As a side…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 6

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 7

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 8

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 9

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 10

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 11

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 12

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Stealth Hitch That Fits 2011 BMW 335D

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching