Recommended Replacement Trailer Fender for 2000 Escort Boat Trailer

Question

Question:

I am looking for a pair of fenders with dimensions 24L X 8.5H X 9 W.

asked by: Patrick L

0

Expert Reply:

I do have an option for you but the closest sized fender we have for what you're looking for is the Fulton Single Axle Trailer Fender with Top Step part # F008542 which measures 23-11/16" long x 7-1/2" wide x 8-11/16" tall. This is a universal fender which is made of plastic and is white in color. It has a five year warranty. In regards to installation, you should be able to use your existing brackets for mounting although some modification may be required.

expert reply by: Conner L

0

Answer 1

Yes you need to use brackets like part #CE26065PGA or #CE26061G to install the Fulton Single Axle Trailer Fender with Top Step #F008542. Basically you just secure one side of the bracket to your trailer and then the other side of the bracket to the…

view full answer...

Answer 2

The Fulton fenders part #F008554 are universal in that they can mount a number of ways depending on the trailer. I attached a picture that shows a very common way. Or you can use L-brackets like part #PF775-BKT-2 which are commonly used as well.

view full answer...

Answer 3

I recommend using the Fulton Single Axle Trailer Fender #F008542 if you are wanting to mount the fender on the inner wheel flange. The Fulton Single Axle Trailer Fender #F008540 uses Mounting Brackets #CE26065PGA to hold the fender in place. It uses…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 8

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 9

You're correct. The repalcement for your existing B12EA-22 brake would be #AKEBRK-7R-SA for the right side and #AKEBRK-7L-SA for the left.

view full answer...

Answer 10

Thank you for the pictures! For a replacement option I recommend the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K #DX29FR to replace your current actuator. The #DX29FR has a 7500lb trailer weight…

view full answer...

Answer 11

For a single axle trailer, you want the shackle strap to be able to move so that you have the spring deflection needed for your suspension. Angled like the photo or even almost vertical is fine you just don't want the shackle strap to bind and…

view full answer...

Answer 12

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Recommended Replacement Trailer Fender for 2000 Escort Boat Trailer

Product Page this Question was Asked From

Continue Researching