Upgraded Heavy Duty Shackle Kit for 2017 Keystone Impact

Question

Question:

2 of the shackle links broke on my 2017 keystone impact toy hauler. 5200 lb dexter axle ser no#244892. I would like to replace them all with an upgrade kit. what would you suggest? 2.25 in hole to hole, 3.5in overall. thank you,

asked by: Donald M

1

Helpful Expert Reply:

For a kit that comes with upgraded heavy duty shackles, bushings, and wet bolts that are the size you are looking for you'd want the MORryde part # MR46ZR and you'd be set. This would work great on your 5,200 lb axle setup.

expert reply by: Jameson C

1

Answer 1

Between the two kits, the better option for replacing your 2-5/8" shackle straps is the version with the shorter 2-1/4" shackle straps, which is the following part number: - MORryde Suspension Upgrade Kit for Tandem Axle Trailers #MR46ZR…

view full answer...

Answer 2

I reached out to MORryde and the MORryde Rubber Equalizers for Tandem Axle Trailers - 35" Wheelbase - 8K #MR27ZR you were looking at is designed for 35" axle spacing and would not work with your trailer with 36" axle spacing. My…

view full answer...

Answer 3

You should be able to get the nylon bushings out fairly easily. In the worst case scenario, you can use an old 5/8 inch bolt or piece of round bar stock and punch the bushing out. The bronze bushings can be pounded in with a mallet or a hammer. If…

view full answer...

Answer 4

The MORryde Shock Absorbing Suspension Equalizers #MR27ZR would be a great addition to your horse trailer and I highly recommend them. These are designed for any tandem-axle trailer like yours with a 35" wheelbase and work with up to 8,000 lb…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but they…

view full answer...

Answer 7

Hey Mike, To determine if the MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR would be a compatible fit you'll first want to measure the bolt hole spacing on your current equalizers. The #MR87ZR has a 6-1/2" center to center…

view full answer...

Answer 8

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 9

Yes, the MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps #MR76ZR will fit with the Equa-Flex system on your Grand Design.

view full answer...

Answer 10

Well shackle length is mainly based on the height difference between the front and rear hangers. The rear hanger normally doesn't hang as low as the front so that the shackle can offset the difference and add the ability to move. What is the…

view full answer...

Answer 11

Yes, axle spread and wheel base by definition are the same measurements. You will measure from the center of one axle to the center of the 2nd axle to determine what you axle spread is. This may be difficult as some wheels and covers will make this…

view full answer...

Answer 12

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Upgraded Heavy Duty Shackle Kit for 2017 Keystone Impact

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching