Gooseneck Hitch For A 2022 RAM 3500 Cab And Chassis With Flat Bed

Question

Question:

I have a 2022 RAM 3500 chassis cab with a flat bed on it. I am looking for a gooseneck with a turnover ball. Can you tell me the product number that I need.

asked by: Randy M

0

Expert Reply:

We have just the perfect gooseneck trailer hitch for your 2022 RAM 3500 with flat bed!

The B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1500 has a gross towing weight up to 30,000 pounds and has a vertical load limit up to 7,500 pounds. Some modification will be done for installation. The hitch has a raw finish steel construction.

I attached a review video link below.

expert reply by: Noah E

0

Answer 1

I had the Buyers Products 2-5/16" Fabricators Flatbed Gooseneck Hitch #3375613500 measured and have a picture with all measurements included. This is indeed rectangular and is typically installed with the longer sides going across the bed…

view full answer...

Answer 2

I do have an option for you but there are not any custom fit gooseneck trailer hitches for your 1997 Ford F-350 Cab and Chassis. In order to install a gooseneck trailer hitch you would need to have a fabricator install a set of braces that span the…

view full answer...

Answer 3

Cab and chassis trucks have a much narrower set of frame rails so the gooseneck hitches we offer for the standard trucks do not fit. Your best option is to use the B&W Turnoverball Underbed Gooseneck Trailer Hitch for Flatbed Trucks - 30,000…

view full answer...

Answer 4

I spoke with my B&W representative who confirms that to install their GNRK1121 #BW77FR Turnover Ball hitch on a 2021 Ford F-150, the center of the 4 inch hole for the gooseneck ball would be placed 42-5/8 inches forward of the rear edge of…

view full answer...

Answer 5

Unfortunately, the option of purchasing just the mount without the ball is not available. There are many other options and comparable products on our website that would fit your Ford truck but they all come with the ball. I recommend purchasing the…

view full answer...

Answer 6

You do have the installation of the U-bolt safety chains correct for the Buyers Products 2-5/16" Fabricators Flatbed Gooseneck Hitch #3375613500. I have cut out and added below the section of the instructions for the #3375613500 which details…

view full answer...

Answer 7

The B&W Turnoverball gooseneck hitches are different parts for a 2013 Chevy Silverado 2500 and a 2008 Chevy Silverado 2500. Both the center sections and the installation kits are different, and I'll list the hitches that fit both trucks for…

view full answer...

Answer 8

The only option for a gooseneck hitch on a cab and chassis would be custom fabrication. The B&W Turnoverball Underbed Gooseneck Trailer Hitch part #BWGNRK1500 is designed for this type of application so that's what I recommend. None of the…

view full answer...

Answer 9

The dimensions are below for the B&W Turnoverball Underbed Gooseneck Trailer Hitch #BWGNRK1500. Overall dimensions of the plate- 6” X 8” Bottom of the plate to the bottom of the socket Fin (brace) – 2-1/4" Bottom of the plate to the end of…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...