Correct Torflex Lift Kit for 1999 Starcraft Travelstar 17CK

Question

Question:

fit a 1999 starcraft travelstar 17ck

asked by: Christopher M

0

Expert Reply:

It does look like your 1999 Starcraft Travelstar 17CK has a Dexter Torflex Axle so the correct Torflex Lift Kit is part # K71-707-01 which is designed for a 2,300 to 4,000-lb axle.

expert reply by: Conner L

0

Correct Torflex Lift Kit for 1999 Starcraft Travelstar 17CK
(click to enlarge)

Answer 1

If your current awning is a 16 foot awning you can use this replacement #LCV000334402. This is compatible with Solera, Dometic A&E, and Carefree of Colorado awnings. Dometic A&E make the Sunchaser Awning Model #834AV18.401

view full answer...

Answer 2

Given the information you provided, your 1995 Jayco 1006 ST has a Dexter Torflex #10 axle on it. The correct lift kit for that axle is the Torflex Lift Kit #K71-707-01. As you stated, this lift kit will not work with 3" high profile brackets.…

view full answer...

Answer 3

I can absolutely confirm the correct lift kit for your trailer. Based on your photos, you do in fact have a #10 Torflex axle, and they are compatible with the lift kits because you do not have 3" high-profile brackets (which just means the…

view full answer...

Answer 4

The Dexter Torflex Axle Lift Kit #K71-707-01 will only work if your Starcraft Satellite 17RB has a #10 Dexter Torflex 2-5/8" axle, and this kit will provide 2-5/8" lift for your travel trailer. Alternatively, Dexter Trailer Springs…

view full answer...

Answer 5

Increasing the tire and wheel size can increase the height of the trailer but it's usually quite minimal. Before you do anything else you should see if the pin box can be adjusted. Although you have to be careful here since This will lower the…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 8

The Dexter Torflex Lift Kit #K71-707-02 referenced in your question is designed for the #10 Torflex axle with a 2,300 to 4,000 pound capacity. As you mentioned, the lift kit cannot be used with Torflex axles that use a 3 inch high profile bracket.…

view full answer...

Answer 9

Based on the specifications that Dexter gave me for your axle, your axle is a 3,500 lbs torsion axle. We do not carry torsion axles, so the best upgrade for your trailer would be an axle-less suspension system. The axle-less system will be far easier…

view full answer...

Answer 10

The Dexter Axle Torflex axles are basically broken up into the following categories: #9 - 1,000 - 2,200 lb #10 - 2,300 - 4,000 lb #11 - 4,100 - 6,000 lb #12 - 5,500 - 7,200 lb Based off of your 2004 R-Vision Trail-Lite Model 8306S being a tandem axle…

view full answer...

Correct Torflex Lift Kit for 1999 Starcraft Travelstar 17CK

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching