Will Reese Goose Box Fit Pin Box with Serial Number S002615748

Question

Question:

Will a Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter - Lippert 1621 - Fit a fifth will Lippert Pin Box with S/N - S002615748.

asked by: Mindy

1

Helpful Expert Reply:

I sent your pin box serial number to Lippert and they told me your 5th wheel has a Lippert 1621 pin box rated at 15.5k so the Reese Goose Box part # RP85FR that you referenced would fit and work great.

expert reply by: Jameson C

1

Answer 1

The Goose Box Doesn't specifiy the height required from the ground to the ball. Instead it specifies the height from the coupler connection to the front bottom bolt where the pin box attaches. I've attached photos of these dimensions…

view full answer...

Answer 2

I went to our warehouse and measured the holes you mentioned you wanted the measurement for on the Lippert 1621 5th Wheel Pin Box, part #LC1387882. The holes measure 3/8 inch diameter. I have also attached a drawing of this pin box with the…

view full answer...

Answer 3

Thank you for the picture! I reached out to my contact at Lippert and based on the serial number you provided I was able to confirm that your trailer has a 1621 pin box with an 18000lb rating. For a gooseneck pin box that will fit you will need…

view full answer...

Answer 4

I do have a great solution for you, however the Convert-A-Ball Cushioned Gooseneck Adapter #CAB-C5GX1216 cannot be used with the Road Armor pin box on your trailer. This is simply because the cushioned design coupled with the adapter will create…

view full answer...

Answer 5

To tow a 5th wheel trailer with your truck that has a Hauler bed and a recessed gooseneck hitch installed, there are a few different options. Since the goosneck hitch is already installed the easiest way would be to adapt either the truck or trailer…

view full answer...

Answer 6

Your 2018 Dutchmen Voltage 3605 5TH wheel toy hauler has the mounting bolt pattern for a 1621HD Pin Box #LC1191151. You need the Reese Goose Box #RP85FR to allow you to use your gooseneck ball to tow your Voltage. The maximum GVWR is 20,000lbs with a…

view full answer...

Answer 7

I spoke with Demco and they informed me that the square plate that attaches to the tube which holds the hitch ball in place on the Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter part #DM8550046 is 8" long x 5" wide. Therefore, you…

view full answer...

Answer 8

Since your gooseneck ball is not recessed under the bed surface you wouldn't be able to use the Demco Recon part #DM8550046 since it was designed for the recessed ball and wouldn't line up properly with what you have. Unless you can move the…

view full answer...

Answer 9

Mainly the difference is the Lippert 1116 is considered a medium length pin box and the 1621 is considered a long one. It's not by much but the 1621 stick out about 3 inches further.

view full answer...

Answer 10

If your flat bed has a gooseneck hitch ball above the flat bed, you will have no issue using a Reese Goose Box to replace your trailer pin box. If you have a recessed gooseneck hitch ball, I've attached a drawing from the manufacturer that shows…

view full answer...

Answer 11

To ensure that the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box #GY58GR you will want to verify that your 2019 Keystone Cougar 315RLS does have 1621 pin box. The easiest way to confirm this is by the sticker that is on the top of the…

view full answer...

Answer 12

The Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter #RP85FR is only going to be roughly 3/4" longer from the 5th wheel pin box that comes standard on your 2022 Keystone Montana 3121RL. For this reason I do not recommend using…

view full answer...

Will Reese Goose Box Fit Pin Box with Serial Number S002615748

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching