Replacement Hitch Portion of 14K Curt MV Weight Distribution System

Question

Question:

Hello, I would like to know if you can sell just the hitch portion of the weight distribution system? My hitch was stolen but I still have the bars and the sway control. The part number is C17063. Thank you!

asked by: Stephen R

0

Expert Reply:

Sorry to hear that about your Curt MV Weight Distribution System w/ Friction Sway Control # C17063!

We do have replacement parts available for this system. Here are various pieces of the head unit that you might need:

Adjustable Shank - # C17100
Replacement Head - # C17075
Hardware - # C17076
2-5/16" Hitch Ball - # A-6

To discourage future tampering I recommend using a hitch lock like the etrailer # e98880. If someone was really determined they could still beat the lock (given enough time, talent, and resources) but hopefully by adding the lock it will make them look for an easier target.

Attached are some videos for you to check out.

expert reply by: Jon G

0

Answer 1

With your 2021 Ford Ranger having a maximum tongue weight rating of 750lbs you will not be able to tow your Dune Sport toy hauler. The 750lb rating is the tongue weight allowed before adding a weight distribution hitch. While the Curt Weight…

view full answer...

Answer 2

Yes, you can change our the spring bars on your 1,400 lb Curt MV Weight Distribution System #C17063 to the lower-rated 600 lb bars, and what you would need are two of the following bars: - Replacement Spring Bar for Curt MV Weight Distribution System…

view full answer...

Answer 3

Curt offers one replacement weight distribution head which is for the Curt MV round bar setups, part #C17075. The spring bars that fit the Curt MV replacement head are 1-1/2" diameter, like #C17073.

view full answer...

Answer 4

The Replacement Head for Curt MV Weight Distribution Systems part #C17075 does not come with the bolts that you will need to attach it to the Curt Adjustable Weight Distribution Shank part #C17100. For this, you would also need the Replacement Bolt…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

The B&W Continuum #BW78FR and the Reese Strait-Line #RP66083 are both great systems. The B&W Continuum is going to be easier to set up, but as far as sway control goes, I definitely have to give the edge to the Reese Strait-Line. The…

view full answer...

Answer 12

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...