Replacement 3,500 lbs Axle for a Big Tex Trailer
Question:
I am needing to replace my brake axle on my Big Tex trailer. I dont remember the trailer model number, but the direct replacement axle from you would be the Dexter # 35543E-ST-89. The brakes on my old axle are still in good order. Can I replace my axle with the Dexter # T3584F-8974 and add the brakes from my old axle to this one? If so, what other parts will I need if any to complete the installation?
asked by: James P
Expert Reply:
I do not have the Dexter # 35543E-ST-89 or any information on it in my system. I could also not find anything on Dexter's website but if the axle on your Big Tex Trailer has an inner bearing # L68149 and outer bearing # L44649 then your current hubs will fit with the Dexter Trailer Axle Beam with Standard Spindles item # T3584F-8974.
This axle is 89" wide from hub face to hub face and has a 74" spring center. This is a 3,500 lbs axle.
If your current axle has different dimensions or a different spindle size then go ahead and email me the bearing sizes your current axle uses and your lug pattern and I will be happy to find you a better replacement.
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Axle Beam with Standard Spindles - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Video: Optronics Trailer Lights - Reflectors - RT10RB Review
- Q&A: Recommended Disc Brake Components for Nuwa Hitchhiker 5th Wheel Trailer Conversion
- Q&A: Lug Nut Torque Spec for a 1/2 Stud with Coned Lugs on a 15 in Steel Wheel
- Shop: CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc
- Shop: Replacement Adapter Port for Kodiak Disc Brake Calipers and Solenoid Valves
- Shop: Kodiak Wrench Set - 1/4" Line Wrench, 3/8" Line Wrench, 1/2" Combination Wrench
- Shop: Kodiak Disc Brake Caliper - Dacromet - 7,000 lbs to 8,000 lbs
- Shop: Kodiak Hydraulic Brake Hose - 3/16" Male Fittings w/ Stainless Flares - 1/8" ID - 1.5'
- Shop: Oralite Reflector for Truck or Trailer - 3-1/2" x 2" Rectangle - Stick On - Red - Qty 1
- Shop: Peterson Spitfire Low Profile Rectangular Trailer Reflector - Wide Angle - Stick On - Amber
- Q&A: How To Determine The Correct Axle To Replace Mobile Home Axles On Trailer
- Q&A: Is It Required The Spring Seat Be Welded to Trailer Axle
- Q&A: Accuracy Of Axle Spring Center Measurements For Dexter Axles
- Q&A: Can Spring Seats Be Moved on a 3,500 lbs Axle?
- Q&A: Do Spring Seats Have to Be Welded to Install Axle Over Under Kit
- Search Results: brake hose kit
- Search Results: brake hose
- Search Results: cotter pin
- Search Results: brakes
- Search Results: kodiak 225
- Search Results: reflector
- Search Results: roller
- Video: Dexter Trailer Axle Beam w/ Standard Spindles - 3,500 lbs Installation
- Video: Loctite Threadlocker 262 Review
- Video: CE Smith Trailer Suspension - Leaf Spring Suspension - CE23002 Review
- Shop: Trailer Hitch
- Video: etrailer Trailer Axle 4-Leaf Double-Eye Spring Installation
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Article: Double-Eye Trailer Suspension System Review
on Trailer Suspension Parts
