Is There a Specific Width of Butyl Tape to Use When Installing a Roof Vent with Fan

Question

Question:

Which width butyl tape is required for this vent fan? Is 3/16inch thickness recommended? Thank you

asked by: Kevin E

0

Expert Reply:

When installing the MaxxFan Roof Vent w/ 12V Fan # MA00A04301K, there is not a required butyl tape width. You just need to ensure that the butyl tape covers the screw holes.

The Alpha Systems Butyl Tape for RV Weatherproofing # AL33FJ is 3/4" wide and would be sufficient to use for installing the roof vent. It is 3/16" thick, we do recommend that you use butyl tape that is at least 3/16" thick.

You will also want to use some LaSalle Bristol XTRM Universal Self-Leveling Sealant # 34427034145-1 when installing the roof vent.

expert reply by: Scott S

0

Answer 1

The MaxxAir MaxxFan Mini Roof Vent w/ 12V Fan - Manual Lift - 4 Speed #MA00-04301M that you referenced would not let any light in since the lid is totally solid so for a semi-opaque lid you'd want the smoked version part #MA00-04401M.

view full answer...

Answer 2

The fan motor in the MaxxFan Roof Vent w/ 12V Fan #MA00A04301K is brushless. It draws 5 amps and the fan can move 900 CFM.

view full answer...

Answer 3

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Answer 4

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 5

Generally speaking, the lube plate will need to cover the skid plate on the 5th wheel hitch. There are some pin boxes out there that will recommend a specific lube plate but most of the times this classification will be from the 5th wheel hitch…

view full answer...

Answer 6

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 7

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 8

The closest modern tire size to a 7.00-15 tire is a 225-75-15 like the #AM10256 tire you mentioned. Typically, a 225/75-15 tire will measure about 8-3/4 to 9 inches wide by around 28-1/2 inches in diameter. We offer the same size in a Load Range E as…

view full answer...

Answer 9

The Titan Hitch Box Extension and Reducer for 2-1/2" Trailer Hitches, #RP45292, is a confirmed fit for your 2012 Chevrolet Silverado 2500 HD short bed with a Lance camper. This extension is specifically designed for your slide-in camper with the…

view full answer...

Answer 10

The Reese Titan Extension/Reducer you referenced, part #RP45292 would work great with the 2-1/2 inch Class V hitch on your Ram. As you mentioned, the extension has a 8K capacity when cut down to the 24 inch length, that will provide a 2 inch receiver…

view full answer...

Answer 11

There is a Titan hitch extender that should work for you, but would require a Titan hitch be installed on your truck to handle a tongue weight loaded that far from the hitch. It is Reese part #RP45292. You can use it as a 34 inch extension or cut it…

view full answer...

Answer 12

You can use a 7-Way and 4-Way connector at the same time just as long as you are not overloading the light circuits. If your camper has a lot of outside lights like running lights, and brake/stop/turn lights then the lights that perform the same…

view full answer...