Curt Trailer Wiring for 2019 Lexus RX350 Tow Package

Question

Question:

How do I know if my 2019 Lexus RX350 AWD has Towing prep package? I did find the wiring cable cape under real driver side. does that mean my vehicle has the Towing prep package?

asked by: James

0

Expert Reply:

Yes, since you were able to find the trailer wiring connector under the rear of your 2019 Lexus RX 350 that would indicate that it has the factory tow package and that the trailer wiring kits like the Curt part # 56083 would be the correct solution to add trailer wiring.

expert reply by: Jameson C

0

Answer 1

Hey Shane, for your 2020 Lexus RX 350 that didn't have a factory hitch the trailer wiring that you honestly should have gone with is the part #C56217 which is for the versions of the vehicle that don't have the tow package. While your vehicle…

view full answer...

Answer 2

The Curt T-Connector Vehicle Wiring Harness for Factory Tow Package #56083 requires your 2021 Lexus RX 350 to have the factory tow package which includes a factory installed module to power the trailer lights. Since your harness does not have power I…

view full answer...

Answer 3

I went ahead and did some investigating and it turns out that the reason your Curt T-Connector Vehicle Wiring Harness for Factory Tow Package #56083 is not working is due to the fact that you do not have the factory towing package. Instead,…

view full answer...

Answer 4

In order to add a trailer wiring harness to your 2020 Lexus RX 350L you'll want to use the Curt #C56217.

view full answer...

Answer 5

We sure do! The Curt Class III hitch, part #C73DR is a confirmed fit for the 2021 Lexus RX 350. For a trailer wiring harness, use #C56217. For a ball mount, you'll need #C45010 with pin and clip #PC3, and for a trailer ball use #19260 for a 1-7/8…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Answer 8

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 9

The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 12

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Curt Trailer Wiring for 2019 Lexus RX350 Tow Package

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching