Curt Custom Fit Vehicle Wiring - Trailer Hitch Wiring - 56083 Review Video

There's a possibility you could add enough washers to the install hardware of the Draw Tite hitch part #75540 to allow it to fit under the rear bumper without trimming but since that would void the warranty of the hitch we cannot recommend that.…

Since we have not had a chance to install the hitch on 2016 Lexus RX350, I have attached the representative photo used by the manufacture of the hitch, installed on the vehicle from the instructions, which I've linked to this page for you. The…

Both of the trailer hitches that fit your 2018 Lexus RX 350 will give you the same amount of clearance. The etrailer #e94AR and Curt #C13272 that fit your Lexus each have approximately 15-1/2 inches of clearance from the ground to the top of the…

That harness you found would plug into the gray connector of the Tow Ready Custom Fit Vehicle Wiring #118245 that you referenced and thats all you would need to do to have a working 4-way on your 2001 Toyota 4Runner.

If your 2017 Lexus RX 350 didn't come with the factory tow package then an additional harness with a powered converter is needed to actually activate the plug that you used to install the Tekonsha T-One Vehicle Wiring Harness #118252. This…

It sounds like you are wanting to install a trailer wiring harness on a 2013 Lexus RX 350. If that is the case we have some great options. I recommend the T-One Vehicle Wiring Harness, part #118252 for with factory tow package or part #118255 for…

A tow package for a vehicle is usually a frame mounted trailer hitch and trailer wiring on a vehicle like your 2002 Dodge Dakota. If you have those two things you could pretty easily assume you have the tow package. Or, you can take the VIN of your…

The support plate/sway bar that gets relocated to install the Curt Hitch part #C13143 on a F Sport model 2015 Lexus RX 350 does not affect the geometry or the handling of the vehicle. With it installed according to the instructions there would be no…

It is actually very easy to remove that bar and install the hitch then reattach the bar to the hitch. I have included a picture from the instructions for trailer hitch #C13143 (as well as a link to the instructions). It is as simple as unbolting it…

Not necessarily. If your 2015 Lexus RX 350 came with the tow package then you just need the T-One #118252, but if it doesn't have the tow package then you need the T-One #118255 with the converter. The tow battery fuse slot would only be used if…

If you are sure your 2018 Lexus RX 350L does not have the factory tow package then your only option is to hardwire a 4-way to your vehicle with a universal kit, the Vehicle Wiring Harness #C59236.

I'm assuming that you're needing to know so you can choose the correct wiring harness, correct? You could call your Lexus dealer and give them your VIN, and they should be able to tell you how your RX350 is equipped. Or, you could remove the…