Can Ultra Fab King Pin Tripod be Used with Grand Design Solitude 375

Question

Question:

What kind of king pin can be used on a Solitude 375 5th wheel?

asked by: Julie C

0

Expert Reply:

We've checked in the past and have determined that the Grand Design Solitude 375 uses the Lippert 1621 pin box which the fifth wheel tripod you referenced part # UF19-950001 would easily work great with as the 1621 is the most common pin box out there.

expert reply by: Jameson C

0

Answer 1

I recommend the Ultra-Fab 5th Wheel King Pin Tripod Stabilizer #UF19-950001 for your Grand Design Reflection 150 Series 29RL. This tripod has a weight capacity of 5,000-ls, which should be more than enough to support the pin weight of your Grand…

view full answer...

Answer 2

You might not notice as much of difference adding the MORryde Hitch Mounted Stabilizer for 2" Trailer Hitches #MR22AR since you stated your stabilizers are close by but you'd still be adding more support for your 2011 Keystone…

view full answer...

Answer 3

The Ultra-Fab 5th Wheel King Pin Tripod Stabilizer part #UF19-950200 would be best for harsher environments. The Ultra-Fab 5th Wheel King Pin Tripod Stabilizer part #UF19-950600 has a black coating which will also resists rust but if this coating…

view full answer...

Answer 4

Ultra-Fab 5th Wheel King Pin Tripod Stabilizer #UF19-950001 has a height range of 37 inches to 50 inches and a capacity of 5,000 pounds. The distance from the ground to the pin box skid plate where the king pin is attached would need to by within the…

view full answer...

Answer 5

The Ultra-Fab 5th Wheel King Pin Tripod Stabilizer - Steel - 37" to 50" - 5,000 lbs #UF19-950001 are great for taking away the bounce/sway and can be used with your auto-leveling 5th wheel especially the bounce in the space over the king…

view full answer...

Answer 6

The Ultra-Fab 5th Wheel Tripod Stabilizer #UF19-950001 is designed for stabilization and not truly to hold a load on its' own. I really like these as stabilizers but I don't believe I would trust them to hold a load while I make repairs to my…

view full answer...

Answer 7

I checked with Ultra-Fab and the Ultra-Fab 5th Wheel King Pin Tripod Stabilizer part #UF19-950001 has a 5,000 lb weight capacity. That said, it wouldn't be supporting the full pin weight since the landing gear legs are still supporting the…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 12

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Can Ultra Fab King Pin Tripod be Used with Grand Design Solitude 375

Product Page this Question was Asked From

Continue Researching