Parts Needed to Add Electric Brakes to Aluma 7210H Trailer with 3,500 lb Axle
Question:
I have an Aluma 7210H trailer, that comes with a Lippert 3500 lb torsion axle. Ive upgraded to 15x6inch wheels. Which of your electric brake kits will work for this application. Is there anything else I would need other than the electric brake kit?
asked by: Troy V
Expert Reply:
In addition to the 10" Electric Trailer Brake Kit # AKEBRK-35-SA you need the Mounting Hardware # BRKH10B and 2 of the Easy Grease Trailer Hub and Drum Assembly # AKHD-545-35-EZ-K per brake kit. It's also a good idea to make sure your axle has brake mounting flanges with a 4-bolt pattern as that's what the brakes will install on.
If your Aluma 7210H trailer didn't come with brakes initially then you'll likely need to add a 7-Way connector, run the wiring for the brakes, and add a breakaway battery kit as well.
For these parts I recommend the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box # HS381-9000, 10 Gauge Wire # 10-1-1 (sold by the foot) with Butt Connectors # DW05745-10, and then the Hopkins Engager Push-To-Test Trailer Breakaway Kit # 20400.
Attached are some videos and a helpful article for you to check out.
Products Referenced in This Question
Hopkins Engager Push-To-Test Trailer Breakaway Kit with Built-In Battery Charger - Top Load
- Trailer Breakaway Kit
- Kit with Charger
- Top Load
- Single-axle
- Tandem-axle
- LED Tester
- Hopkins
more information >
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Mounting Hardware for 10" Brake Assemblies
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 10 Inch
- Redline
more information >
Deka Heat Shrink Butt Connector - 12-10 Gauge - Nylon Insulation - Yellow - Qty 10
- Wiring
- Wire Connectors
- Butt Connectors
- 12-10 Gauge
- Deka
more information >
Wiring Kit for Hydrastar Electric Over Hydraulic Actuators
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Wiring
- Hydrastar
more information >
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: How to Pick Out Trailer Brakes for a Aluma Trailer
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Video: Review of Lippert Trailer Leaf Spring Suspension - Bolt-On Shock Mount Kit - LC281255
- Q&A: Process for Adding Electric Trailer Brakes to an Aluma Trailer
- Q&A: What Axles Does 2019 Casita 17 Deluxe Have
- Q&A: How Does Lippert Bolt-On Shock Kit Mount?
- Shop: Folding Assist Step - Galvanized Finish
- Shop: Roadmaster Comfort Ride Add-On Kit for Triple Axle Trailers - 3,500-lb Axles
- Shop: Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 3,500-lb (2-3/8") Axle
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Video: TruRyde Electric Trailer Brake Kit Installation
- Q&A: Parts Needed to Add Brakes to Aluma 6310H Trailer
- Q&A: Parts Needed For Installing Electric Trailer Brakes On a Utility Trailer With Dexter 3,500LB Axle
- Shop: Trailer Wiring
- Search Results: 7 way upgrade
- Search Results: 4 pin to 7 pin
- Search Results: 4 pin to 7 pin adapter
- Video: Epicord 7 Way Molded Trailer Plug with Junction Box Revew
- Article: Trailer Wiring Diagrams
- Search Results: 44649
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Hitch
- Video: Choosing the Right Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 68149
- Search Results: 25580