How to Pick Out Trailer Brakes for a Aluma Trailer
Question:
I am interested in adding electric brakes to an Aluma 6310 utility trailer. The axle is rated at 2000# and has 5 lug 4.5inch pattern, 13inch wheels. It is a torsion axle with flanges. Do you have enough info on Aluma products is this enough to determine what I need?
asked by: Jim W
Expert Reply:
I attached a link to a page that has all of the 2,000 lb axle hub/drums we carry with a 5 on 4-1/2 inch bolt pattern. What you will need to do is pull the bearings out of your current hubs and select the numbers you have from the filters on the page to see which will fit.
Or if you can't find the numbers email me back with the diameter of the spindle where the bearings ride.
On the product page for the hubs you end up going with there will be a related parts section where the correct assemblies will be listed. You will need a left and right hand side.
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 2K Axles - 7" - 5 on 4-1/2 - L44649 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Video: Review of ComeUp Replacement Wireless Remote - CU881102
- Video: Dexter Nev-R-Adjust Electric Trailer Brake Kit Installation
- Shop: Replacement Wireless Remote for ComeUp Seal Recovery Winches
- Shop: Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 10" - Right Hand - 3,500 lbs
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Q&A: Will B&W Continuum Weight Distribution System Work with Center Frame Piece on Trailer Tongue
- Shop: Dexter Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs to 2,200 lbs
- Shop: Dexter Electric Trailer Brake Assembly - 7" - Right Hand - 2,000-lbs to 2,200-lbs
- Q&A: Parts Needed to Add Brakes to Aluma 6310H Trailer
- Video: Trailer Valet JXS Trailer Jack with Footplate Review
- Q&A: Parts Needed To Install Electric Over Hydraulic Disc Brakes On a 2021 Grand Design Imagine XLS 21BHE
- Q&A: Process for Adding Electric Trailer Brakes to an Aluma Trailer
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Shop: Brake Controller
- Shop: Trailer Wiring
- Q&A: What Causes a Brake Magnet To Fall Off After Removing the Hub
- Shop: Vehicle Tow Bar Wiring
- Shop: Trailer Hitch
- Search Results: 84545
- Video: etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-545-2-EZ-2K Review
- Search Results: cargo trailer ladder rack
- Video: Best 2003 Honda CR-V Tow Bar Wiring Options
- Shop: Vehicle Tow Bar Brake System
- Q&A: Parts Needed to Add Electric Brakes to a Utility Trailer with a 3500 Lbs Axle and Brake Flanges
- Search Results: 7 pin trailer connector
- Search Results: etbc7
- Search Results: 84546uc3~ez
- Video: etrailer Electric Trailer Brake Kit Installation
on Trailer Hubs and Drums
