Is the Grate on the Furrion 2-in-1 Range Oven Die Cast or Stamped Enamel

Question

Question:

The description of the above stove states that it has a die cast grate. The video seems to show a stamped enamel grate. The die cast grate would be a great improvement and we will order it if the description and not the video is correct. Furrions website makes no mention of a die cast grate. Thanks in advance for your response,

asked by: Tim M

1

Helpful Expert Reply:

I checked with Furrion and confirmed the Furrion 2-in-1 Range Oven with Glass Cover part # FR97KR has an enamel stamped removable grate, not die cast.

expert reply by: Conner L

1

Answer 1

Yes, the glass top on the Furrion 2-in-1 Range Oven #FR97KR is removable. The hinge for the glass has a small Phillips-head screw with a Phillips-head cap on it (pictured below) that can be removed to take the glass top off.

view full answer...

Answer 2

There is an ignition knob for the cooktop and the oven for the Furrion 2-in-1 Range Oven with Glass Cover #FR97KR that you referenced.

view full answer...

Answer 3

Since we do not currently sell Greystoner propane ranges or ovens I don't have enough data to draw a concludion. Over all the catagories of products we do sell I would personally lean towards Furrion over Greystone for overall quality based on…

view full answer...

Answer 4

Good question, and the two ovens are exactly the same but for the color of the panels behind the control knobs and at the bottom of the oven door: - Stainless Steel: Furrion 2-in-1 Range Oven with Glass Cover - 21" Tall #FR97KR - Black: Furrion…

view full answer...

Answer 5

The 21 inch Furrion Stove part #FR37KR is Black. It is also available in stainless steel as part #FR97KR. White is not an available option.

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

If you have the Ford 3" hitch then you can definitely add it but, yes it would change the weight capacity. The TorkLift Cannon Hitch Extension item #TLE1636 only has a 3,600 lbs towing capacity and a 360 lbs maximum tongue weight. If used with a…

view full answer...

Answer 9

The etrailer Enclosed Trailer Transition Plate #e32JR will work very well for loading and unloading motorcycles. It has a working load limit of 1,000 lbs so even with your 850 lb bike, you are well within parameters weight capacity wise. Especially…

view full answer...

Answer 10

Here is a list of the tools needed to install the etrailer Enclosed Trailer Transition Plate #e32JR: - Tape Measure - Drill - Hex Drive Socket Adapter - 10mm Socket - 13mm Socket I have also added a link below to the instructions of the #e32JR for…

view full answer...

Answer 11

In regards to the etrailer Enclosed Trailer Transition Plate #e32JR, the end plates are not designed to be swapped. There are pre-drilled holes in the end plates and center plates, which would not line up correctly if the end plates were swapped.…

view full answer...

Answer 12

I do see the 2024 Ford Transit 350 is unchanged from the 2023 model year so there should be no reason the SumoSprings Solo Custom Helper Springs #SSR-121-54. When I reached out to SumoSprings they have not yet been able to verify fitment yet as they…

view full answer...

Is the Grate on the Furrion 2-in-1 Range Oven Die Cast or Stamped Enamel

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching