Can Furrion AC/DC Distribution Panel # FDP12WABL be used with Inteli Power Converter

Question

Question:

Can i use this Distribution panel Item # FDP12WABL with my INTELI POWER 9000 CONVERTER MODEL # PD-9040 INPUT 105-130 VAC , 60 HZ 600 WATTS OUTPUT 13.6 VDC 40 AMP includes charging and load ?

asked by: PHIL

1

Helpful Expert Reply:

Yes you can use your Inteli-Power converter with the Furrion Distribution panel part # FDP12WABL that you referenced.

expert reply by: Jameson C

1

Answer 1

When the Progressive Dynamics RV Power Control Center with AC/DC Panel #PD4560K18LS8 is connected to shore power and a battery it will draw power from the shore power source while charging the battery. If there was no battery present and was…

view full answer...

Answer 2

What you need is two of the 50 Amp Go Power Automatic Transfer Switches, #34270278. A transfer switch will have a dominate side. How the input is wired determines how power passes through the unit.

view full answer...

Answer 3

Per the linked installation instructions, the Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger, #PD4560K18LS8 should be installed vertically (converter section down) or horizontally (converter section to the…

view full answer...

Answer 4

If at all possible you want to mount breaker panels like the #PD4560K18LS8 vertically but if this is not practical you can mount it horizontally as well. I'd recommend checking with an electrician for help with the application.

view full answer...

Answer 5

The Furrion AC/DC Distribution Panel, #FDP12WABL can have up to 8 circuit breaker installed. AC distribution is maximum of 12 branches (7 for 30A main; 12 For 50A main). The AC main breakers are 30Amp or 50Amp x2.

view full answer...

Answer 6

The Furrion AC/DC Distribution Panel will work to replace the WFCO WF-8930/50 distribution panel but is not considered an exact replacement. We do not carry a distribution panel that is an exact replacement for that WFCO model but the Furrion will…

view full answer...

Answer 7

You can use the Manager30 Battery Management System part #RED88FR with the Furrion panel part #FDP12WABL which would give a way to run the charge to your batteries with an AGM profile or a Lithium profile. The Manager30 would plug right into the…

view full answer...

Answer 8

The Furrion AC/DC Distribution Panel #FDP12WABL does cover everything you'd need on the output side based on the circuits you are wanting to run in your travel trailer. It can only accept AC power on the input side like you mentioned so you would…

view full answer...

Answer 9

The Furrion AC/DC panel part #FDP12WABL that you referenced uses AC power on the input side and on the output side puts out AC and DC power. You do not have to use the AC power on the output side but it does require it on the input side.

view full answer...

Answer 10

When installing the Furrion AC/DC Distribution Panel #FDP12WABL there are 2 AC slots for 30a or 50a breakers and 15 DC fuse slots for 20a or 30a fuses. You'll want to use regular household breakers that can be sourced at your local hardware…

view full answer...

Answer 11

The American CS6000XL that you referenced is no longer available and there isn't a direct replacement for it but the closest solution as a replacement would be the Progressive Dynamics RV Control Center part #PD4560K18LS8 which as the same…

view full answer...

Answer 12

If you are just looking for a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have now.

view full answer...

Can Furrion AC/DC Distribution Panel # FDP12WABL be used with Inteli Power Converter

Continue Researching