Brake Controller Recommendation for a 2016 Honda Odyssey

Question

Question:

I need to add a 7 pin powered brake controller to my 2016 Honda Odyssey. What would you recommend? Are there advantages with going to a wireless system? It looks like I would still have to wire in the 7 pin system. It currently has a dealer installed 4 pin for my boat trailer. Thanks!

asked by: Tom W

0

Expert Reply:

The advantage of using a wireless brake controller like the Curt Echo # C51180 is that the Upgraded Wiring Kit # ETBC7L is what you'll need, and this kit only has the power wire ran up to the battery as opposed to having to route wiring into the cab of your vehicle and making your connections there.

I recommend going with the Echo because it's easy to use and you aren't taking up precious leg room inside your vehicle. Once you've used the app to get your settings right where you need them I recommend setting the phone down and having the Manual Override Button # C83HR installed in an easy-to-reach location so you're still able to activate your trailer brakes in an emergency situation.

Attached are some review videos for you to check out.

expert reply by: Jon G

0

Answer 1

There isn't a plug and play option for a 7-way available, but we have the parts you'd need to complete the installation. You'll need to begin by installing a 4-pole trailer connector. There are two iterations of a 4-pole harness available…

view full answer...

Answer 2

The auxiliary 12-volt wire that runs from the 7-way connection to 7-way trailer plug will supply 12-volt power from the vehicle to the trailer. The 12 -volt power will allow interior or exterior lights to run that are not wired in to the…

view full answer...

Answer 3

For your 2019 Honday Odyssey you can get the factory wiring harness for the 4-way or you can use the T-One Vehicle Wiring Harness with Upgraded Circuit Protected ModuLite HD Module - 4-Way Flat #118781 which installs behind the driver's side trim…

view full answer...

Answer 4

There is a law called the Magnussen-Moss warranty act that states, in part, that if you install an aftermarket part on your car then it will not void the warranty unless that part caused the problem. So installing the trailer wiring harness, #118781,…

view full answer...

Answer 5

We have a really nice selection of aftermarket trailer hitches available that are confirmed to fit your 2019 Honda Odyssey. The biggest difference between an OEM hitch and most aftermarket units is that a factory hitch will typically be a bit more…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

view full answer...

Answer 12

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Brake Controller Recommendation for a 2016 Honda Odyssey

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching