Availability of 2 inch Receiver Hitch for 2016 Kia Soul

Question

Question:

Eco hitch shows a 2inch reciever ??? Will this work on 2016 soul

asked by: Rodney A

1

Helpful Expert Reply:

EcoHitch does indeed offer a 2 inch hitch for a 2016 Kia Soul, as part # 306-X7326.

If you click the provided link, you can see a video showing the hitch being installed on a 2017 Kia Soul. The procedure shown in the video would be the same for your 2016 model.

expert reply by: Mike L

1

Answer 1

Because using an adapter increases the distance between the load of the bikes and rack and the hitch receiver, more leverage is exerted on the hitch as well as its attachment points to the vehicle. This is why the tongue weight capacity of the hitch…

view full answer...

Answer 2

The highest capacity hitch for your 2016 Kia Soul is going to be the EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - 2" item #306-X7326. This custom fit hitch bolts to your 2016 Kia Soul with included hardware. It has a maximum gross…

view full answer...

Answer 3

The EcoHitch part #306-X7326 that you referenced is a 2 inch hitch confirmed as a fit for your 2019 Kia Soul if that's what you have. You also mentioned a 2010 Soul which this is not a fit for and we do not have a similar 2 inch hitch for. As…

view full answer...

Answer 4

In order to use the Thule Hitching Post Pro 4 Bike Rack #TH934XTR on the back of your 2018 Kia Soul, you will need to install a trailer hitch receiver such as EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - 2" #306-X7326. I recommend…

view full answer...

Answer 5

Draw-tite offers a 2" hitch for your 2020 Kia Sou, it is the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - 2" #DT25GR. The 2" is a great choice since you will be able to choose from a wide variety of accessories.

view full answer...

Answer 6

For your 2016 Kia Soul, I recommend the EcoHitch Hidden Trailer Hitch Receiver #306-X7326. This is the only class III hitch we have for your 2016 Soul. The reason a class III is better, is because the 2" x 2" receiver opening found on class…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...