Replacement Mounting Hardware Kit for BAKFlip MX4 Hard Tonneau Cover on 2022 Ford F-150 5.5 Bed

Question

Question:

Bought a used BAKFlip MX4 cover but it has no hardware. Looking for compatible replacement installation hardware. 2022 F-150 w/ 5.5 ft bed

asked by: Troy M

1

Helpful Expert Reply:

Yes, the Replacement Mounting Hardware Kit # BAKBK-306KIT will have all of the hardware parts you need to install the BAKFlip MX4 Hard Tonneau Cover # BAK76FR on your 2022 Ford F-150 with the 5-1/2' bed plus 2 additional mounting clamps you can use as replacement parts if needed in the future.

expert reply by: Jon G

1

Answer 1

There is a ladder rack that is compatible with the BAKFlip MX4 Hard Tonneau Cover #BAK76FR on your 2021 Ford F-150 with a 5-1/2 foot bed, though you can't mix the Yakima and Elevate parts. So what you will need is the entire TruXedo rack…

view full answer...

Answer 2

I recommend the BAKFlip G2 Hard Tonneau Cover for your 2023 Ford F-150. We have this for the 5-1/2' #BAK96FR, 6-1/2' #BAK56FR and 8' #BAK36FR bed lengths. This is a hard cover and has a quad fold design. The cover can be…

view full answer...

Answer 3

The TS T-Slot Rails for Truck Hero Elevate Rack System - Full Size - X-Short Bed - 63inch - Aluminum Item #TH75FR is basically a rail system that allows a Truck Hero Elevate system to attach to several tonneau covers. This is compatible with the…

view full answer...

Answer 4

Thanks for reaching out! I recommend using the BAKFlip MX4 Hard Tonneau Cover #BAK76FR for the 5-1/2' bed on your 2023 Ford F-150. I really like this cover because it has an aluminum construction with a matte black finish so it's going to be…

view full answer...

Answer 5

I'd be more than happy to help out! The ladder rack I recommend pairing with the BAKFlip MX4 Hard Tonneau Cover #BAK76FR on your short bed 2023 Ford F-150 is the TruXedo Elevate Truck Bed Rack System #TX96NV because it not only fits with the…

view full answer...

Answer 6

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 7

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 10

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 11

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 12

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...