Replacement Axle Recommendation for Snowmobile Trailer with #9 Torflex Axle

Question

Question:

I was interested in replacing the axle on my snowmobile trailer. I have a picture of the sticker that came on the axle on it now. It is a dexter axle. Any help would be appreciated Thanks

asked by: Joe M

0

Expert Reply:

Thank you for the photo!

It looks like you have a #9 Dexter Axle Torflex axle. We don't have exact replacements for that specific axle but we do have a similar option with the Timbrens like the 2.2K # ASR1THDS01.

The Timbren kits are a newer version of the Torflex system and they have a variety of options. The one mentioned above is for a standard trailer but they also have the kit # ASR1THDS02 which is designed for off-road tires and applications.

Attached are a few videos for you to check out. If you ultimately want to stick with what you have then you'll need to reach out to your local trailer dealer so they can order a Torflex axle for you.

expert reply by: Jon G

0

Dexter Axle Tag on Snowmobile Trailer Axle
(click to enlarge)

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

Traditionally, trailer manufacturers did not use electric brakes on boat trailers because the brake magnet wiring and trailer wiring did not always have the best insulation or water protection. These days, more and more manufacturers are using…

view full answer...

Answer 3

There really isn't a particular maximum trailer weight that is used to determine when brakes need to be added to both axles of a tandem axle setup. While I do still recommend checking your local laws, I am also not aware of any general laws that…

view full answer...

Answer 4

I currently have three diffrent self-adjusting assemblies for your boat trailer with 10" x 2-1/4" electric drum brakes which are attached for you below. eTrailer Electric Trailer Brake Kit part #AKEBRK-35-SA (3,500 Axles) Dexter…

view full answer...

Answer 5

The Trailer Hub and Drum Assembly part #AKHD-545-35-EZ-K would be an excellent replacement for a Tru-Ryde Hub/Drum RVD-H-545. Then for new brakes, I recommend the Hydraulic Trailer Brake Kit part #AKFBBRK-35.

view full answer...

Answer 6

We do have what you need to replace the UFP HD-1377-10 hub and drum as well as add hydraulic brakes for your boat trailer. Here are the exact parts you will need: - Dexter Trailer Hub and Drum Assembly #84546UC3 - Hydraulic Trailer Brake Kit -…

view full answer...

Answer 7

Torque specs for wheel lug nuts will vary depending on the diameter of the lugs, type of lug nut and the wheel's material. The linked chart details the recommended torque for many combinations. Dexter Hub/Drum #84546UC3 has 1/2-inch studs and…

view full answer...

Answer 8

Based on what information I could find about AL-KO 8490 hub and drums, it is rated for 3,500 pound axles, has a 5 on 4-1/2 bolt pattern, and is a 10 by 2-1/4 inch drum. If this is the case, we have several options for you. I have attached a link to…

view full answer...