What Kind Of Materials Is The Alpha Systems Alphabond Repair Tape Compatible With

Question

Question:

RE: Alpha Systems Alphabond Repair Tape for RV Roofs - 50 Long x 3 Wide - White Item # AL32KV. Is this product compatible with EPDM roofing material?

asked by: Mike

0

Expert Reply:

The Alpha Systems Alphabond Repair Tape for RV Roofs # AL32KV is compatible with EPDM as well as wood, metal, fiberboard, ISO board, concrete, TPO, PVC, and mixed elastomer roofing membranes.

expert reply by: Kevin C

0

Answer 1

Alpha #AL28KV (1010) is a non-sag sealant good for verticle surfaces, like sidewalls and end rails. Alpha #AL98KV (1021) is a self leveling sealant good for flat horizontal surfaces. Good around skylights and vents. Alpha #AL45KV (5121) is also self…

view full answer...

Answer 2

Yes it will accept PVC adhesive, the felt backing will soak it up and help create a strong connection/bond. The adhesive has a longer life span than butyl tape and it is cleaner than using caulk or other sealants. It will need to be treated with…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

Hey David, we've used the LaSalle Bristol RV Roof Vent install kit part #344270KITW to install several MaxxFan RV roof vents and it's worked well so it would also work well for you. This comes with everything needed so it would be a great…

view full answer...

Answer 10

Most slides have EPDM rubber roofs but because EPDM is rubber it requires treatment each year to keep it soft and prevent shrinkage. You could replace it with TPO which is another synthetic rubber that will last longer than the EPDM. The smallest…

view full answer...

Answer 11

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 12

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way is…

view full answer...

What Kind Of Materials Is The Alpha Systems Alphabond Repair Tape Compatible With

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching