Retrofit Kit for SnowBear Winter Wolf Snowplows - 2 Point Hitch Mount
(16 reviews)
Price: $335.84
Retrofit Kit for SnowBear Winter Wolf Snowplows - 2 Point Hitch Mount
Item # SB324-120
Our Price: $335.84
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (16)
- Q & A (0)
- Photos
SnowBear Snow Plow Parts - SB324-120
- Frame Parts
- Retrofit Kit
- SnowBear Plow Parts
- SnowBear
Retrofit kit enables you to use your 2-point-mounted SnowBear Winter Wolf snowplow with a single 2" x 2" front-mounted trailer hitch receiver.
Features:
- Retrofit kit converts 2-point, custom-mounted SnowBear Winter Wolf snowplow for use with a 2" x 2" front trailer hitch receiver
- Fits SnowBear Winter Wolf Snowplows (sold separately)
- Models SB324-116, SB324-166, and SB324-167
324-120 Universal Cross Member for Snow Bear Snow Plows
Customer Reviews
Retrofit Kit for SnowBear Winter Wolf Snowplows - 2 Point Hitch Mount - SB324-120
Average Customer Rating: 4.6 out of 5 stars (16 Customer Reviews)
Retrofit kit enables you to use your 2-point-mounted SnowBear Winter Wolf snowplow with a single 2" x 2" front-mounted trailer hitch receiver.by: Dan G06/17/2022
Well engineered product. Less than 30 min to install on my 2022 TRD Off-road.
No trimming at all on TRD Off Road model.
It looks a little utilitarian up close, but not so much from a distance. My cycle jack worked perfectly for this task. BTW.. The fish wires are a stroke of genius.
by: Dave11/02/2023
The main section that goes into the receiver, bent after the first couple uses. I use this for my personal driveway in lower Michigan only. Would not recommend.
Jenny N.
11/7/2023
I reached out to the manufacturer who advised that it will bend if plowing heavy amounts of snow. The snow height should not exceed 6-12 inches and should not be used to ram into snowbanks or ice.
by: John11/16/2020
The sq. bar that fits into the receiver hitch bent at the first receiver pin hole.
I didn't have a lot of confidents in this adapter because all the leverage of the plow is concentrated all to one point instead of two.
by: Michael 01/12/2023
Product is well made and allows me to use my old plow on any vehicle with a front hitch.
by: Tom S08/29/2019
Fits perfect works great. The only down side if it's a down it's built like a tank heavy.
by: Michael J12/23/2022
Ordered on Dec 20, received on Dec 23. Unboxed, well built, heavy duty, with excellent finish. All parts accounted for. So far very pleased with purchase. Will see how installation goes. More after install.
by: Bob10/15/2016
Perfect fit and very heavy duty.
Bob
10/17/2017
Everything is good with the hitch and mount for the plow. I really only use it in the winter though so it hasn’t seen any use since then. I did have a couple of people stop and ask me where I found the front hitch mount and I sent them your way.
by: James02/09/2019
Easy to install. Good instructions. Plan to use with a Snowbear plow.
by: Matt B.08/07/2017
Very pleased I was able to keep my existing plow using this retrofit kit after buying a new truck . Construction is excellent (solid steel) so no issues after using after a full winter of plowing in NY. Strongly recommended!
by: Tom Z10/29/2020
Part fit perfectly and the blade mounted great. Only 1 major problem...it didn't snow!
by: Allen01/08/2019
Its solid not tubed! Vs the original. Engineering short cuts improved.
by: Snowbear retro-fit adapter 11/18/2016
Easy to use and actually less price than purchasing the mounts- plus I can use it on my next vehicle. :)
by: Allen01/08/2019
Its solid not tubed!
by: Richard11/09/2016
Very fast shipping, great product!
by: Marc12/13/2016
Easy to Install
by: Donald 02/01/2023
16
16
See what our Experts say about this SnowBear Snow Plow Parts
- Hitch-Mount Adapter for SnowBear Winter Wolf SnowplowSnowBear Winter Wolf Snowplow Hitch Adapter # SB324-120 is the correct part for your 1996 Winter Wolf plow to allow you to install it in the 2-inch front-mount receiver hitch on your Silverado. Snowbear has kept the same 31-inch spacing on their plow mounts for close to 30 years so this part is correct. I did call Snowbear to confirm. My technical contact there mentioned that since this item moves the plow's weight further away from the vehicle care should be exercised to avoid bending...
view full answer... - Distance From Center of Pin to Center of Pin on SnowBear RetroFit Kit # SB324-120The SnowBear Retrofit Kit # SB324-120 that you referenced does indeed have a distance of right at 31 inches from the center of one pin to the center of the other. Based on the spacing of your SnowBear cups this appears to be a perfect match. This will let you attach your plow to a 2" hitch receiver at the front of your truck.
view full answer... - Correct Adapter Needed for Old SnowBear Snowplow Purchased in 1999-2000The part that you are looking for is the Retrofit Kit for SnowBear Winter Wolf Snowplows # SB324-120 that you referenced. I spoke with my contact at SnowBear who said that the pin measurements are the same and that they measure about 32-5/8" apart on center. If you measured just the distance between them and found that to be 29-3/4" then that would explain the difference there.
view full answer... - Dimensions of the Retrofit Kit for SnowBear Winter Wolf Snowplows Part # SB324-120The distance between the two dowel pins on the Retrofit Kit for SnowBear Winter Wolf Snowplows part # SB324-120 is 33" apart and the dowels pins are 1-5/8" thick x 4" long.
view full answer... - Replacement Hitch Mount Recommendation for Older Snowbear Plow that Fits 2 inch HitchI spoke with my contact at Snowbear and he told me that the kit you actually want is the part # SB324-120 which is the correct adapter for your older SnowBear plow and will allow it to connect to a 2 inch front hitch. Your dimensions listed match what this is designed to fit as well.
view full answer... - Adapter Kit Recommendation for Adapting Older SnowBear Winter Wolf Plow to 2 inch HitchI spoke with my contact at Snowbear and he told me that the kit you actually want is the part # SB324-120 which is the correct adapter for your older SnowBear plow and will allow it to connect to a 2 inch front hitch.
view full answer... - Adapter to Allow Using Snowbear Winter Wolf Plow in 2-Inch HitchYes, since all Snowbear Winter Wolf plows use the same 31-inch spacing for their mounts you can use their adapter # SB324-120 to allow use in your 2-inch hitch.
view full answer... - Recommendation for Adapting Older SnowBear Plow to 2 Inch Front Mounted ReceiverI reached out to my tech contact at Snowbear and he was able to confirm based on the dimensions you gave that the Retrofit Kit for SnowBear Winter Wolf Snowplows - 2 Point Hitch Mount # SB324-120 is indeed what you need. This will turn your 2 point bracket mount plow into a single point compatible with your front mounted receiver.
view full answer... - Are There Custom SnowBear SnowPlow Mounting Brackets for a 2023 Chevy ColoradoI do have an option for you but I checked with SnowBear and they only offer Custom SnowBear SnowPlow Mounting Bracket for a Chevrolet Colorado up to 2018. That said, you may be able to switch to the hitch mount type of attachment which is much more versatile. In which case, you'd need the Retrofit Kit for SnowBear Winter Wolf Snowplows part # SB324-120. In order to confirm, you'd need to make sure your dowel's are spaced apart 33". If so you can use the Draw-Tite Front Mount Trailer Hitch...
view full answer... - Can Snowbear Snow Plow for Frame Mounts Install on 2007 Honda RidgelineWe might have a solution for you but it depends on which model winch you have. The only way to install a Snowbear plow on your 2007 Honda Ridgeline is with a front hitch mount. So you'd have to have a hitch installed like the Curt # 33328. It sounds like your plow was designed for mounting to the 2-point frame brackets that SnowBear also uses. What hopefully will work for you then is the # SB324-120 as this converts that style of plow to a hitch mount style. The plow would need to be one...
view full answer... - Adapter to Use Snowbear Plow for 2 Point Mount with Front Hitch of 2019 Chevy Silverado 2500I have a solution for you but the only Snowbear plow mount option for your 2019 Chevy Silverado 2500 is using a front hitch like the # C31071 so you are going to have to use the hitch adapter part # SB324-120 with your plow to use it with your new truck.
view full answer... - Parts Needed to Attach SnowBear Plow to 2019 Ram 2500 Big HornTo attach a SnowBear plow to a front hitch like the Curt # C31089 that fits your 2019 Ram 2500 what you need is the hitch adapter part # SB324-120. This will enable your current plow to attach to a hitch so you'd be set with it and the front hitch.
view full answer... - Retrofit Snow Bear Plow to Fit Front Hitch of 2015 Dodge Ram Big HornFor your older Snowbear plow we have confirmed with them that the correct kit to convert it to fit a 2 inch hitch is the part # SB324-120 that you referenced. Then for a hitch for your 2015 Ram Big Horn you'd want the Curt # C31067 and you'd be set. There isn't a way to convert your plow to a hydraulic style though.
view full answer...
- Options to Mount a SnowBear Snow Plow On a 2011 Chevrolet SilveradoIn order to mount a SnowBear Snow Plow on a 2011 Chevrolet Silverado you can use the Custom Mounting Bracket Kit part # SB397-002 which is designed for the two-point style mount or you can use the Retrofit Kit for SnowBear Winter Wolf Snowplows part # SB324-120 with the Curt Front Mount Trailer Hitch Receiver part # 31322 to convert from a two-point style to a one-point style.
view full answer... - How To Mount SnowBear Snow Plow on a 2022 Ram 1500I do have an option for you but the only snowplow mount options for a 2022 Ram 1500 are hitch mounted therefore you will need a front mount trailer hitch, the Curt Front Mount Trailer Hitch Receiver part # C87FR is what I recommend. If you have a two point mounted snowplow you'll need to convert to hitch mount using the Retrofit Kit for SnowBear Winter Wolf Snowplows part # SB324-120.
view full answer... - How To Use SnowBear Hydraulic and Winter Wolf Snowplow on a 2020 Ram 1500I do have an option but there is not yet (May 2020) a Custom Mounting Bracket Kit for SnowBear Hydraulic and Winter Wolf Snowplows for a 2020 Ram 1500. However, you can convert the snowplow from the custom mounting bracket style to the hitch mount style with the Retrofit Kit for SnowBear Winter Wolf Snowplows - 2 Point Hitch Mount part # SB324-120 and then use the Curt Front Mount Trailer Hitch Receiver part # C87FR.
view full answer... - Recommended Snowplow Retrofit Kit and Front Mount Trailer Hitch Receiver For 2021 Ram 3500As long as your older Snowbear Winter Wolf snowplow has 1-1/2" mounting pins the Retrofit Kit for SnowBear Winter Wolf Snowplows - 2 Point Hitch Mount # SB324-120 you mentioned is correct as it is designed for plows with a 31" center. Moving on to the front mount hitch for your 2021 Ram 3500 I recommend the EcoHitch Hidden Front Mount Trailer Hitch Receiver - Custom Fit - 2" # EH37FR due to it having a 1000lb vertical load limit compared to the # DT36MR you mentioned that only has a 500lb...
view full answer...
Do you have a question about this Snow Plow Part?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Written by:
Laura H
Updated by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Dan G.
6/18/2023
It only snowed enough twice during the 22-23 winter season to use the plow, but the adapter worked perfectly to facilitate the mounting of my 20 year old SnowBear plow which has the 2 pin mount. Spacing of the pins was perfect. The plow does extend quite a bit farther than it did with the frame mounted brackets on the old RAM, but ground clearance is much improved over the mount on the RAM.