Will Handsfree Liftgate of 2022 Chevy Trailblazer Still Work with Draw Tite Hitch Installed

Question

Question:

I have a 2022 trailblazer AWD RS with hands free liftgate. Will the hands free liftgate still function properly if a hitch is installed?

asked by: Amy B

0

Expert Reply:

With the install of a hitch on your 2022 Chevy Trailblazer RS like the Draw Tite part # DT55GR you will still be able to use the hands free liftgate feature of the vehicle but you would just have to kick to one side or the other.

expert reply by: Jameson C

0

Answer 1

Yes, for your 2021 Chevrolet Trailblazer we have the Draw-Tite Max-Frame Trailer Hitch Receiver #DT55GR. This is a class III trailer hitch that has a maximum towing capacity of 3,500-lbs, a maximum tongue weight capacity of 525-lbs, and has a…

view full answer...

Answer 2

The Draw-Tite Max-Frame Trailer Hitch Receiver #DT55GR is our best receiver for your 2023 Chevrolet Trailblazer. This is our only receiver for your Trailblazer which has the 2" opening. This will allow you to use a larger selection of ball…

view full answer...

Answer 3

Yes there is some minor trimming of the bumper fascia/skirt on a 2022 Chevy Trailblazer (all models, including your RS) to install the Draw-Tite Max-Frame Trailer Hitch Receiver #DT55GR. This is needed so the receiver can protrude, but the portion…

view full answer...

Answer 4

It sounds like you're talking about the video of the Draw-Tite trailer hitch receiver, part #75234, being installed on a 2016 Lincoln MKX. At the 5:23 mark the installer removes the fascia piece that I believe you're referring to. This part…

view full answer...

Answer 5

I attached a link to an install video for the Draw Tite hitch 76434 #DT55GR on a 2021 Buick Encore GX just like yours that will show you the exact process.

view full answer...

Answer 6

To add a hitch to your 2024 Chevrolet Trailblazer, I recommend the Draw-Tite item #DT55GR. This hitch is custom fit and bolts to your Chevy with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs towing…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Will Handsfree Liftgate of 2022 Chevy Trailblazer Still Work with Draw Tite Hitch Installed

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching